Product ID:ZYTEC NYLON 6/6 NATURAL, NNR
MSDS Date:09/01/1985
FSC:6810
NIIN:00N066029
MSDS Number: CBWDY

Emergency Phone: 609-227-0500

Info Phone: 609-227-0500

Cage: 9K884

Telephone: 609-227-0500

Cage: 9K884

POLYHEXAMETHYLENE ADIPAMIDE

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION: NOT A PROBABLE ROUTE OF
EXPOSURE. INHALATION: VERY LOW TOXICITY. GRANULES NOT RESPIRABLE.
SKIN CONTACT: MOLTEN POLYMER CAUSES THERMAL BURNS. EYE CONTACT:
MECHANICAL IRRITATION. CHRONIC: NO CHRONIC EFFECTS KNOWN.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGEST: CALL MD IMMEDIATELY . INHAL: REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE OXYGEN/ARTIFICIAL RESPIRATION) . SKIN: IF
MOLTEN POLYMER CONTACTS THE SKIN, COOL RAPIDLY WITH COLD WATER. DO
NOT ATTEMPT TO PEEL POLYMER FROM SKIN. OBTAIN MEDICAL ATTENTION FOR
THERMAL BURN. EYES: FLUSH WITH COLD WATER FOR AT LEAST 15 MINUTES.

Extinguishing Media:WATER, CARBON DIOXIDE, FOAM, DRY CHEMICALS.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:LARGE MOLTEN MASSES MAY IGNITE
SPONTANEOUSLY IN AIR. WATER QUENCHING OF SUCH MASSES IS GOOD
PRACTICE.

Spill Release Procedures:SWEEP UP TO PREVENT SLIPPING HAZARDS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:COOL, DRY PLACE. KEEP CONTAINERS
TIGHTLY CLOSED TO PREVENT MOISTURE ABSORPTION AND CONTAMINATION.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:NONE UNDER NORMAL PROCESSING. USE NIOSH/MSHA
APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST AT PROCESSING EQUIPMENT TO KEEP PARTICULATE
BELOW 15 MG/M3 (OSHA LIMIT FOR NUISANCE DUSTS).
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Melt/Freeze Pt:M.P/F.P Text:>401F,>205C
Solubility in Water:INSOLUBLE
Appearance and Odor:NATURAL (WHITE); NO ODOR.
Percent Volatiles by Volume:1

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND OXIDIZING AGENTS.
Stability Condition to Avoid:HEATING ABOVE 340C.
Hazardous Decomposition Products:AMMONIA, CARBON MONOXIDE, HYDROGEN
CYANIDE, ALDEHYDES.

Waste Disposal Methods:INCINERATION OR LANDFILL IN COMPLIANCE WITH
FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.