Product ID:M-BOND 200 ADHESIVE
MSDS Date:08/01/1996
FSC:8040
NIIN:01-410-8373
Kit Part:Y
MSDS Number: CDCMV

MEASUREMENTS GROUP INC

RALEIGH, NC 27611-5000
US

Emergency Phone: 919-365-3800

Info Phone: 919-365-3800

Preparer: R L FRIDLEY

Cage: 88952

MEASUREMENTS GROUP INC

WENDELL, NC 27591 US

Telephone: 919-365-3800

Cage: 88952

ETHYL-2-CYANOACRYLATE *96-4*

CAS: 7085-85-0

Fraction By Weight: 90-95%

POLYMETHYLMETHACRYLATE, PLEXIGLAS (CARCINOGEN BY IARC -

CAS: 9011-14-7

RTECS: TR0400000

Fraction By Weight: 5-10%

HYDROQUINONE; 1,4-DIHYDROXYBENZENE; 1,4-BENZENEDIOL

CAS: 123-31-9

RTECS: MX3500000

OSHA PEL 2 MG/CUM

ACGIH TLV: 2 MG/CUM

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:BONDS SKIN RAPIDLY & STRONGLY.
INHALATION: IRRITATION TO NOSE & BRONCHIAL PASSAGES. PROLONGED
OVEREXPOSURE MAY PRODUCE ALLERGIC REACTIONS W/ASTHMA-LIKE SYMPTOMS
IN SENSITIVE INDIVIDUALS. SKIN: A LARGE DROP MAY CAUSE BURN UPON
SOLIDIFICATION. INGESTION: (SEE SUPP)
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, BURNS.

First Aid:CYANOACRYLATE ADHESIVE BONDS HUMAN TISSUE INCLUDING SKIN IN
SECONDS. HANDLE BY PASSIVE, NON-SURGICAL FIRST AID. OBTAIN MEDICAL
ATTENTION IN ALL CASES.

Flash Point Method:TCC
Flash Point:150-200F
Extinguishing Media:CO2, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:WEAR PROTECTIVE CLOTHING & SCBA.

Spill Release Procedures:FLOOD W/WATER TO POLYMERIZE CYANOACRYLATE
ADHESIVE & TO CONTROL PRODUCT VAPORS. SOAK UP W/INERT
ABSORBENT/SCRAPE UP CURED PRODUCT.

Handling and Storage Precautions:STORE AT <75F TO MAXIMIZE SHELF LIFE.
DON'T USE COTTON GLOVES.
Other Precautions:AVOID CONTACT W/SKIN & EYES & BREATHING VAPORS.

Respiratory Protection:USE FRESH AIR BREATHING APPARATUS/SOLVENT FILTER
MASK WHEN EXPOSED TO LARGE QUANTITIES.
Ventilation:POSITIVE DOWN-DRAFT EXHAUST VENTILATION, TO MAINTAIN VAPOR
CONCENTRATIONS BELOW TLVS.
Protective Gloves:POLYETHYLENE
Eye Protection:SAFETY GLASSES/GOGGLES
Other Protective Equipment:POLYETHYLENE APRON
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
HEALTH HAZARDS CONT'D: IT'S ALMOST IMPOSSIBLE TO SWALLOW
CYANOACRYLATES. THE ADHESIVE SOLIDIFIES & ADHERES IN MOUTH. LIPS
MAY BECOME STUCK TOGETHER. KEY1 = V4.

HCC:V1
Boiling Pt:>65.6C, 150.F
Vapor Pres:<0.2
Vapor Density:>1
Spec Gravity:1.09
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR LIQUID W/SHARP, PUNGENT ODOR.

Stability Indicator/Materials to Avoid:YES
ALCOHOLS, AMINES, ALKALIES, PEROXIDES, COTTON, WOOL.
Stability Condition to Avoid:HIGH TEMPERATURES, WATER

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.