CDGBN - M-PREP NEUTRALIZER 5A

  • MSDS: CDGBN
  • Manufacturer: MEASUREMENTS GROUP INC
  • Product Name: M-PREP NEUTRALIZER 5A
  • National Stock Number: 6850-01-347-2355
Product Identification

Product ID:M-PREP NEUTRALIZER 5A
MSDS Date:11/02/1993
FSC:6850
NIIN:01-347-2355
MSDS Number: CDGBN

Responsible Party
MEASUREMENTS GROUP INC
RALEIGH, NC 27611
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 919-365-3800

Preparer: R.L. FRIDELY

Cage: 88952

Contractor
MEASUREMENTS GROUP INC
WENDELL, NC 27591 US

Telephone: 919-365-3800

Cage: 88952

Ingredients

AMMONIUM HYDROXIDE (CERCLA)

CAS: 1336-21-6

RTECS: BQ9625000

Fraction By Weight: <0.02%

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


SODIUM PHOSPHATE, TRIBASIC (CERCLA)

CAS: 7601-54-9

RTECS: TC9490000

Fraction By Weight: <0.05%

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


SODIUM TETRABORATE, DECAHYDRATE

CAS: 1303-96-4

RTECS: VZ2275000

Fraction By Weight: <0.01%

OSHA PEL 10 MG/M3

ACGIH TLV: 5 MG/M3; 9596


WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 99.92%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:AMMONIUM HYDROXIDE IRRIT/CORR TO BODY
TISSUES,SENS PERSON MAY REACT TO EVEN DIL SOLNS.EXCESSIVE VAP INHAL
IRRIT MUCOUS MEMBRANES OF RESP TRACT.LIQ CONTACT TO EYE CAN
SEVERELY DMG,CAUSE LOSS OF VISION. INGEST CORR TO DIGESTIVE TRACT.
Explanation of Carcinogenicity:PER MSDS:NTP/IARC/OSHA:NOT LISTED.
Effects of Overexposure:SKIN:IRRIT,REDDENING,POSSIBLE
BURNS.INHAL:HEAD,COUGHING,POSSIBLE LUNG DMG(EDEMA,DIFFICULTY IN
BREATH).EYE:POSSIBLE BURNING,REDDENING.INGEST:POSSIBLE BURNING
SENS.
Medical Cond Aggravated by Exposure:PRECLUDE FROM EXPOSURE ANYONE WITH
EYE OR PULMONARY DISEASE.

First Aid

First Aid:SKIN:FLUSH W/COPIOUS AMTS OF WATER.SEEK MED AID IF IRRIT
PERSISTS.INHAL:REMOVE TO FRESH AIR.BREATH DIFFICUTL HAVE TRAINED
PERSON ADMIN OXYGEN.KEEP WARM/@REST.CONTACT PHYSICIAN
PROMPTLY.EYE:IMEMD FLUSH W/COPIOUS AMTS OF WATER FOR @LEAST 15MINS
INCLUDING UNDER EYELID.CONTACT PHYSICIAN PREFERABLY
OPHTHALMOLOGIST.INGEST:IF CONSC PROMPTLY GIVE LOTS OF WATER,DIL
VINEGAR OR CITRUS JUICES TO DRINK (SUPPL)

Fire Fighting

Flash Point:NONE
Autoignition Temp:Autoignition Temp Text:NP
Lower Limits:NA
Upper Limits:NA
Extinguishing Media:WILL NOT SUPPORT COMBUSTION. USE MEDIA APPROPRIATE
TO SURROUNDINGSURROUNDING FIRE CONDITIONS.
Fire Fighting Procedures:USE COLD WATER SPRAY TO CONTROL VAPORS & COOL
FIRE EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard:WHEN HEATED MATL WILL EMIT NH2 VAPORS
WHICH NECESSITATES RESPIRATORY & EYE PROTECTION FOR
FIREFIGHTING.USE PROTECTIVE CLOTHING.

Accidental Release

Spill Release Procedures:VENTILATE AREA.ABSORB W/ABSORBENT
MATL.NEUTRALIZE W/DILUTE ACID.FLUSH SPILL AREA W/COPIOUS AMTS OF
WATER.
Neutralizing Agent:DILUTE ACID.

Handling

Handling and Storage Precautions:STORE BELOW 80F IN DRY PLACE.KEEP
CNTNRS TIGHTLY SEALED.
Other Precautions:AVOID BREATH VAPORS & DIRECT CONTACT.

Exposure Controls

Respiratory Protection:FOR AIR CONTAMINANTS ABOVE TLV OR PERMISSIBLE
LIMITS USE NIOSH APPROVED RESPIRATOR FOR ORGANIC VAPORS.
Ventilation:LOCAL EXHAUST/MECHANICAL:KEEP BELOW TLV.
Protective Gloves:NEOPRENE OR RUBBER GLOVES.
Eye Protection:FULL FACESHIELD,CHEM SAFETY GOGGLES.
Other Protective Equipment:RUBBER APRON, SAFETY SHOWER AVAILABLE IN
LOCAL AREA.
Work Hygienic Practices:WASH THOROUGHLY AFTER USE.USE GOOD HOUSEKEEPING
PRACTICES.
Supplemental Safety and Health
1STAID:FOLLOWED BY MILK.DO NOT INDUCE VOMIT.CONTACT PHYSICIAN.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:212F,100C
Melt/Freeze Pt:M.P/F.P Text:32.0F,0.0C
Decomp Temp:Decomp Text:NP
Vapor Pres:760MM@100C
Vapor Density:1.0
Spec Gravity:1.0
pH:NP
Viscosity:NP
Evaporation Rate & Reference:<1, BUAC=1.
Solubility in Water:100%, COMPLETE.
Appearance and Odor:COLORLESS, MILD AMMONIA ODOR.
Percent Volatiles by Volume:0
Corrosion Rate:NP

Stability

Stability Indicator/Materials to Avoid:YES
ACIDS, PEROXIDES, METALLIC COPPER, TIN, ZINC, & THEIR ALLOYS,
HALOGENATED COMPOUNDS.
Stability Condition to Avoid:NOT APPLICABLE.
Hazardous Decomposition Products:NONE KNOWN.
Conditions to Avoid Polymerization:ADDING NAOH TO THIS MATL &/OR
HEATING WILL VOLATIZE NH3.

Disposal

Waste Disposal Methods:NEUTRALIZE ABSORBENT MATL W/DILUTE ACID.DISPOSE
OF IN ACCORDANCE WITH LOCAL/STATE/FED REGS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.