Product ID:HYDRAULIC OIL 2075TH
MSDS Date:04/12/1996
FSC:9150
NIIN:00-985-7233
MSDS Number: CFYYN

G-C LUBRICANTS COMPANY

977 BRANSTEN ROAD
SAN CARLOS, CA 94070
US

Emergency Phone: 415-592-1050/800-424-9300(CHEMTREC)

Info Phone: 415-592-1050

Cage: 0HJB5

G-C LUBRICANTS COMPANY

SAN CARLOS, CA 94070 US

Telephone: (415) 592-1050

Cage: 0HJB5

PETROLEUM HYDROCARBON

CAS: 64742-52-5

Fraction By Weight: 95-99%

OSHA PEL 5 MG/M3 (OIL MIST)

ACGIH TLV: 5 MG/M3 (OIL MIST)

BENZENE (SARA 313) (CERCLA), MINUTE TRACES.

CAS: 71-43-2

RTECS: CY1400000

Fraction By Weight: SEE ING

OSHA PEL SEE 1910.1028

ACGIH TLV: 10 PPM; A2; 9596

EPA Report Quantity: 10 LBS

DOT Report Quantity: 10 LBS

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN:PROLONGED USE MAY CAUSE
DERMATITIS.EYE:PRACTICALLY NON-IRRIT.INGEST:MAY CAUSE
NAUSEA.INHAL:IN POORLY VENTILATED AREAS OR CONFINED SPACES INHAL
MAY CAUSE IRRIT OF NOSE AND THROAT.
Explanation of Carcinogenicity:PER MSDS:G-C CO HAS BEEN ADVICED THAT
MINUTE TRACES OF BENZENE MAY BE FOUND IN PETRO PRODS INCLUDING PROD
CONTAIN HEREIN
Effects of Overexposure:DERMATITIS, NAUSEA, IRRIT NOSE/THROAT.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:SKIN:REMOVE CONTAM CLOTH.FLOOD SKIN W/WATER FOR @LEAST
15MINS.THEN WASH GENTLY W/MILD SOAP/WATER.CALL PHYSICIAN IF
PAIN,IRRIT,OTHER SYMPTOMS PERSIST.EYE:FLUSH IMMED W/LG AMTS OF
WATER FOR @LEAST 15MIN S.CONSULT PHYSICIAN IF
PAIN,IRRIT,OTHERPROBLEMS PERSIST.INGEST:UNLESS PATIENT IS
UNCONSC,HAVING CONVULSIONS OR CANT SWALLOW GIVE WATER IMMED.DONT
MAKE PATIENT VOMIT.GET MED ATTN.INHAL:REMOVE TO(SUPP)

Flash Point Method:PMCC
Flash Point:385F,196C
Extinguishing Media:USE WATER SPRAY, DRY CHEMICAL, FOAM, CO2.
Fire Fighting Procedures:WEAR FULL PROTECTIVE GEAR & POSITIVE PRESSURE
BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:EMITS HAZARDOUS DECOMPOSITION PRODUCT, CO
AND CO2.

Spill Release Procedures:WEAR PPE.CONTAIN W/INERT ABSORBENT MATL.DISPO
OF IN WASTE MNGMT FACIL OR IN COMPLIANCE W/FED/STATE/LOC REGS.IF
SPILL NOT CONTAMINATED YOU MAY BE ABLE TO DISPO OF IT WHERE
NORMALLY USED.REPORT SPILLS A S REQUIRED TO APPROP AUTHORITIES.US
COAST (SUPPL)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP CNTNR COVERED/SEALED WHEN NOT IN
USE.STORE IN COOL DRY AREA.DONT ADD WATER/ANY OTHER MATL TO DR OF
PRODUCT OR OTHERWISE CONTAMINATE IT.
Other Precautions:NEVER EAT/DRINK/SMOKE IN WORKAREAS.PRACTICE GOOD
PERSONAL HYGIENE AFT USING MATL ESPECIALLY WHEN
EATING/DRINKING/SMOKING/USING RESTROOM OR APPLYING COSMETICS.

Respiratory Protection:PRODUCT DOESNT VAPORIZE & INHAL OF CONCEN PROD
NOT EXPECTED TO BE ROUTE OF EXPO.INHAL CAN OCCUR IN APPLICATIONS
HWERE HIGH MIST LEVELS ARE GENERATED.UNDER THESE
CONDITIONS,RESPIRATORY PROTECTION MAY B E NECESSARY.
Ventilation:NORMAL ROOM.
Protective Gloves:NEOPRENE GLOVES SUGGESTED
Eye Protection:CHEM WORKERS GOGG OR FACE MASK SUGGESTED
Other Protective Equipment:HAVE EYEWASH/SAF SHOWER,ANSI X358.1-1990
CERTIFIED IN WORKAREA.
Work Hygienic Practices:DONT PUT ON CONTAM CLOTHING AGAIN UNTIL ALL
CHEMS HAVE BEEN THOROUGHLY WASHED FRM THEM.SHOES/GLOVES SOAK W/CHEM
(SUPPLE)
Supplemental Safety and Health
1STAID:FRESH AIR.IRRIT PESISTS CALL PHYSICIAN. WORK HGY PRAC:SHOULD BE
DISCARDED. SPILL:GUARD REGS REQUIRE IMMED REPORTING OF SPILLS THAT
COULD REACH ANY WATERWAY INCLUDE INTERMITTENT DRY CREEKS.TOLL- FREE
# 800-424-9300.PREVENT SPILLS FROMENTERING STORM SEWERS/DRAINS &
CONTACT W/SOIL.

HCC:V6
Boiling Pt:B.P. Text:>550F,>288C
Melt/Freeze Pt:M.P/F.P Text:NP
Decomp Temp:Decomp Text:NP
Vapor Pres:<1
Vapor Density:>1
Spec Gravity:0.88
pH:NA
Viscosity:NP
Evaporation Rate & Reference:<1, BUTYL ACETATE=1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:LIQUID, BROWN COLOR, MILD ODOR
Percent Volatiles by Volume:NIL
Corrosion Rate:NP

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CO,CO2.

Waste Disposal Methods:DISPOSE OF IN WASTE MANAGEMENT FACILITY OR IN
COMPLIANCE W/LOCAL, STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.