CFZVQ - M-COAT J RESIN PART 1

  • MSDS: CFZVQ
  • Manufacturer: MEASUREMENTS GROUP INC
  • Product Name: M-COAT J RESIN PART 1
  • National Stock Number: 8030-00N081204
Product Identification

Product ID:M-COAT J RESIN PART 1
MSDS Date:10/25/1995
FSC:8030
NIIN:00N081204
Kit Part:Y
MSDS Number: CFZVQ

Responsible Party
MEASUREMENTS GROUP INC
RALEIGH, NC 27611
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 919-365-3800

Preparer: RL FRIDLEY

Cage: 88952

Contractor
MEASUREMENTS GROUP INC
WENDELL, NC 27591 US

Telephone: 919-365-3800

Cage: 88952

Ingredients

2-BUTANONE; (METHYL ETHYL KETONE) (SARA 313) (CERCLA)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: <5%

OSHA PEL 200 PPM

ACGIH TLV: 200 PPM/300 STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


BISPHENOL A EPOXY RESIN; (EPOXY RESIN)

CAS: 25036-25-3

Fraction By Weight: <5%

OSHA PEL N/K

ACGIH TLV: N/K


ALLYL CHLORIDE, FORMALDEHYDE, PHENOL POLOMER; (PHENOLIC

CAS: 28470-78-2

Fraction By Weight: <5%

OSHA PEL N/K

ACGIH TLV: N/K


CALCIUM CARBONATE

CAS: 1317-65-3

RTECS: EV9580000

Fraction By Weight: 15%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST


THIOL TERMINATED POLYMER, POLYDITHIOETER; (POLYSULFIDE

CAS: 68611-50-7

Fraction By Weight: 67%

OSHA PEL N/K

ACGIH TLV: N/K


SILICON DIOXIDE (AMORPHOUS); (SILICA DERIVATIVES)

CAS: 67762-90-7

Fraction By Weight: 3%

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: MAY CAUSE IRRIT TO RESP
TRACT, COUGHING, CHEST PAIN, THROAT IRRIT, HDCH & DIZZ; MAY BE
ANESTH & MAY CAUSE OTHER CNS EFTS. REVERSIBLE LIVER DMG IS POSS AT
HIGH DOSES. EYES: MAY CAUSE BURN ING, TEARING & REDDENING; POSS
TRANSIENT CORNEAL CLOUDING. SKIN: PRLNG EXPOS MAY CAUSE REDNESS,
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: BURNING, DRYING & CRACKING OF SKIN.
MAY CAUSE SENSIT. INGEST: MAY CAUSE DROW, DIZZ, & NAUS. MAY CAUSE
GI IRRIT.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. IF SYMPTOMS ARE PRESENT,
CONSULT MD. EYES: FLUSH WITH LUKE WARM WATER FOR AT LEAST 15
MINUTES. IF SYMPTOMS PERSIST, CONSULT MD. SKIN: WASH WITH SOAP AND
WATER. IF SYMP TOMS PERSIST, CONSULT MD. INGESTION: CONSULT MD.

Fire Fighting

Flash Point:>200F,>93C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM, OR WATER.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.

Accidental Release

Spill Release Procedures:SCOOP INTO CONTAINERS. CLEAN UP RESIDUE WITH A
SUITABLE SOLVENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:NONE.
Other Precautions:NONE.

Exposure Controls

Respiratory Protection:WHEN SPRAYING OR APPLYING IN ANY CIRCUMSTANCES
LIKELY TO PRODUCE AIRBORNE LEVELS OF HAZARDOUS INGREDIENTS IN
EXCESS OF TLV, USE A NIOSH APPROVED ORGANIC VAPOR CARTRIDGE OR AIR
SUPPLIED RESPIRATOR.
Ventilation:LOCAL EXHAUST/MECHANICAL: GENERAL VENTILATION.
Protective Gloves:SOLVENT RESISTANT GLOVES RECOMMENDED.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:EMERGENCY EYEWASH AND DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA .
Work Hygienic Practices:WASH THOROUGHLY AFTER USE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Vapor Density:>1
Spec Gravity:1.381 (H*2O=1)
VOC Pounds/Gallon:104
Evaporation Rate & Reference:<1 (BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BROWN THIXOTROPIC PASTE

Stability

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:OXIDES OF CARBON, SULFUR DIOXIDE,
TRACES OF HYDROGEN SULFIDE.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.

Other Information

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.