Product ID:QUICK SET SOLDERING INVESTMENT
MSDS Date:03/01/1992
FSC:6520
NIIN:00N082326
MSDS Number: CGCRY

Emergency Phone: 818-718-7000

Info Phone: 818-718-7000

Cage: JO559

Telephone: (800) 322-6666

Cage: 60940

CALCIUM SULFATE

CAS: 7778-18-9

RTECS: WS6920000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MATERIAL NOT KNOWN TO BE TOXIC.
PERSONS EXPOSED TO LARGE AMOUNTS OF DUST MAY BE FORCED TO LEAVE
AREA BECAUSE OF NUISANCE CONDITIONS, INCLUDING COUGHING, SNEEZING
AND NASAL IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES:RINSE W/WATER FOR AT LEAST 15 MINUTES. IF IRRITATION
CONTINUES CALL MD. SKIN:WASH CONTAMINATED AREA W/WATER.
INHAL:REMOVE TO FRESH AIR. INGEST:POWDER HARDENS WHEN IN CONTACT
W/WATER & IF INGESTED MAY RESULT IN OBSTRUCTION. SEE MD.

Flash Point:NONE
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
NON-COMBUSTIBLE.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:SWEEP OR VACUUM MATERIAL FROM SPILLAGE INTO
CONTAINER FOR DISPOSAL. AVOID DUSTING CONDITIONS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:BE SURE PROPER VENTILATION & NIOSH
APPROVED RESPIRATORY PROTECTION & EYE PROTECTION ARE USED IN DUSTY
CONDITIONS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:IF DUSTY CONDITION EXIST, WEAR NIOSH APPROVED
DUST MASK TO GUARD AGAINST NUISANCE DUST PARTICLES.
Ventilation:GENERAL VENTILATION & LOCAL EXHAUST TO MEET TLV
REQUIREMENTS.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MP:2642F,1450C (DECOMPOSES).

Melt/Freeze Pt:M.P/F.P Text:SUPP DATA
Spec Gravity:0.04-2.2
Solubility in Water:0.2-0% @ 40C.
Appearance and Odor:PINK IN COLOR; LOW ODOR.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Waste Disposal Methods:CAN BE DISPOSED OF AS INERT SOLID IN A LANDFILL
OR BY OTHER PROCEDURES I/A/W LOCAL, STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.