Product ID:LIQUID HARDENER 0202
MSDS Date:03/20/1995
FSC:8030
NIIN:00-229-8740
MSDS Number: CGSXB

ITW DEVCON

30 ENDICOTT ST
DANVERS, MA 01923
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 508-777-1100

Cage: 0RZG3

ITW DEVCON

DANVERS, MA 01923-3712 US

Telephone: 978-777-1100

Cage: 0RZG3

(ORAL, RAT) 2500 MG/KG.

CAS: 112-24-3

RTECS: YE6650000

Fraction By Weight: 30-50%

OSHA PEL N/K

ACGIH TLV: N/K

POLYAMIDE; (POLYAMIDE OF CL8 FATTY-ACID DIMERS AND TETA

CAS: 68082-29-1

Fraction By Weight: 50-65%

OSHA PEL N/K

ACGIH TLV: N/K

PHENOL, NONYL-; (NONYLPHENOL)

CAS: 25154-52-3

RTECS: SM5600000

Fraction By Weight: 5-20%

OSHA PEL N/K

ACGIH TLV: N/K

PIPERAZINE, 1-(2-AMINOETHYL)-; (AMINOETHYLPIPERAZINE

CAS: 140-31-8

RTECS: TK8050000

Fraction By Weight: 1-15%

OSHA PEL N/K

ACGIH TLV: N/K

0

RTECS: 9999999VO

LD50 LC50 Mixture:SEE INGREDIENTS.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES:SEVERE IRRITANT.
SKIN:MODERATE IRRITANT. INHALATION: IRRITATION OF NOSE AND THROAT;
NAUSEA AND VOMITING IN SEVERE CASES. INGESTION: MAY CAUSE
IRRITATION OF MOUTH AND THROAT AND GASTROINTES TINAL TRACT.
CHRONIC: REPEATED SKIN CONTACT OR INHALATION OF FUMES CAN CAUSE
SENSITIZATION, WITH (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HEALTH HAZARD: ITCHING, RASHES OR SWELLING OF
SKIN OR AN ASTHMA-LIKE RESPIRATORY REACTION ON LATER EXPOSURE TO
PRODUCT. ING 1: SKIN AND EYE IRRITANT; RESPIRATORY IRRITANT;
SENSITIZER. ING 2: SEVERE EY E IRRITANT. INGS 3 AND 4: SKIN
IRRITANT. SEVERE EYE IRRITANT.
Medical Cond Aggravated by Exposure:ASTHMA, BRONCHITIS OR SKIN
IRRITATIONS.

First Aid:EYES: IMMED FLUSH W/CLEAN WATER FOR AT LST 15 MINS WHILE
GENTLY HOLDING EYELIDS OPEN. GET MED HELP AS SOON AS POSS. SKIN:
IMMED REMOVE CONTAM CLTHG & SHOES & WASH WELL W/SOAP & WARM WATER.
SEE MD IF I RRIT DEVELOPS. INHAL: REMOVE PATIENT TOFRESH AIR. GIVE
OXYGEN/ARTF RESP IF NEEDED. SEE MD IF SYMPS PERSIST. INGEST: DO NOT
INDUCE VOMIT. DILUTE W/LOTS OF MILK/WATER & GET IMMEDIATE MEDICAL
HELP.

Flash Point Method:TCC
Flash Point:>200F,>93C
Extinguishing Media:WATER, CO*2, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:PREVENT SKIN AND EYE CONTACT; REMOVE
CONTAMINATED CLOTHING AND SHOES. ABSORB SPILL ON INERT MATERIAL
SUCH AS VERMICULITE; SCRAPE UP AND TRANSFER TO IMPERVIOUS
CONTAINERS. SCRUB SPILL AREA W/STRONG DET ERGENT AND WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE WELL-CLOSED IN A COOL, DRY
PLACE. THIS PRODUCT HS BEEN TESTED FOR CORROSIVITY IN ACCORDANCE
WITH DOT REGULATIONS AND IS NOT CORROSIVE.
Other Precautions:PROLONGED OR REPEATED OVEREXPOSURE MAY CAUSE
SENSITIZATION AND ALLERGIC REACTIONS. THOSE SO AFFECTED SHOULD
CONSULT MD AND AVOID FURTHER EXPOSURE TO THIS MATERIAL IF
SENSITIZATION IS CONFIRMED.

Respiratory Protection:NONE NEEDED IN NORMAL USE WITH PROPER
VENTILATION. IN POORLY VENTILATED AREAS USE NIOSH APPROVED ORGANIC
VAPOR RESPIRATOR.
Ventilation:GENERAL MECHANICAL VENTILATION IS ADEQUATE FOR OCCASIONAL
USE. FOR PROLONGED OR REPEATED USE, LOCAL EXHAUST IS REC.
Protective Gloves:CHEM-RESIST RUBBER GLOVES(EX, NEOPRENE).
Eye Protection:ANSI APPROVED CHEM WORKERS GOGG(SUPDAT).
Other Protective Equipment:EYE WASH FOUNTAIN AND DELUGE SHOWER WHICH
MEET ANSI DESIGN CRITERIA . OTHER PROT GEAR AS NEEDED TO PVNT SKIN
CONT.
Work Hygienic Practices:REMOVE CONTAM CLTHG & LAUNDER THORO BEFORE
USING. CONTAM LEATHER ARTICLES (SHOES, BELTS) CANNOT BE DECONTAM
AND (SUPDAT)
Supplemental Safety and Health
PH (5% BY WT IN WATER): 10-11. PERCENT VOLATILE: 100 (WT). EYE
PROTECTION: AND FULL LENGTH FACESHIELD . HYGIENE PRACTICE: SHOULD
BE DESTROYED.

Boiling Pt:B.P. Text:>450F,>232C
Vapor Pres:<0.01 @68F
Vapor Density:>1
Spec Gravity:0.98
pH:SUPDAT
Evaporation Rate & Reference:<1 (BUTYL ACETATE=1)
Solubility in Water:30-60%
Appearance and Odor:CLEAR LIQUID W/MILD AMMONIA-LIKE ODOR.
Percent Volatiles by Volume:SUPDAT

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS AND CHLORINATED ORGANIC COMPOUNDS.
Stability Condition to Avoid:EXTREME HEAT OR OPEN FLAME. HEAT IS RELS
WHEN THIS PROD IS MIXED W/EPOXY RESINS; USE CARE WHEN MIXING LARGE
QTYS.
Hazardous Decomposition Products:ACRID AND TOXIC FUMES WITH ORGANIC
AMINES, AMMONIA, OXIDES OF CARBON AND NITROGEN.

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH FEDERAL,
STATE AND LOCAL REGULATIONS . KEEP OUT OF PUBLIC WATER SUPPLIES.
INCINERATE IN APPROVED FACILITY WHERE PERMITTED BY STATE AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.