Product ID:TARGO
MSDS Date:03/31/1993
FSC:6850
NIIN:00-774-5767
Status Code:A
MSDS Number: CHVVN

A.L.WILSON CHEMICAL COMPANY

1050 HARRISON AVENUE
KEARNY, NJ 07032
US

Emergency Phone: 201-997-3300/800-424-9300(CHEMTREC)

Info Phone: 201-997-3300

Cage: 98443

WILSON A L CHEMICAL CO

207 KEARNY, NJ 07032 US

Telephone: 201-997-3300

Cage: 98443

DIETHYLENE GLYCOL MONOBUTYL ETHER

CAS: 112-34-5

RTECS: KJ9100000

METHYL ISOAMYL KETONE

CAS: 110-12-3

RTECS: MP3850000

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM; 9596

TRICHLOROETHYLENE (SARA 313) (CERCLA)

CAS: 79-01-6

RTECS: KX4550000

Fraction By Weight: <10%

OSHA PEL 100 PPM; Z-2

ACGIH TLV: 50 PPM/100STEL,A5;96

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

NONYL PHENOL POLYETHYLENE GLYCOL

CAS: 26027-38-3

RTECS: MD0906000

2-ETHOXYETHANOL (SARA 313) (CERCLA)

CAS: 110-80-5

RTECS: KK8050000

Fraction By Weight: <5%

OSHA PEL S, 200 PPM

ACGIH TLV: S, 5 PPM; 9596

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE:CAN IRRITATE.SKIN:CAN IRRITATE AND
DEFAT SKIN.INGEST:COUGHING AND VOMITING.INHAL:OVEREXPOSURE MAY
CAUSE IRRITATION OR DRYNESS OF NOSE/THROAT OR MAY CAUSE DROWSINESS.
Effects of Overexposure:EYE/SKIN IRRIT.INGEST-COUGH,VOMIT.INHAL
IRRIT/DRYNESS NOSE/THROAT,DROWSINESS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYE:IMMED FLUSH THOROUGHLY W/WATER FOR 15MINS.SKIN:IMMED
FLUSH THOROUGH W/WATER.REMOVE CONTAM CLOTHES.INGEST:SEE PHYSICIAN
AS SOON AS POSSIBLE.INHAL:REMOVE VICTIM TO FRESH AIR.

Flash Point Method:TCC
Flash Point:>200F,>93C
Autoignition Temp:Autoignition Temp Text:NP
Lower Limits:ND
Upper Limits:ND
Extinguishing Media:WATER, CARBON DIOXIDE CO2, DRY CHEMICAL OR FOAM.
Fire Fighting Procedures:ND
Unusual Fire/Explosion Hazard:ND

Spill Release Procedures:ABSORB LIQUID WITH PAPER OR USE VERMICULITE,
FLOOR ABSORBENT OR OTHER ABSORBENT MATL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP IN COOL VENTILATED PLACE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:NONE NEEDED WHEN USED WITH ADEQUATE VENTILATION.
Ventilation:USE IN ADEQUATELY VENTILATED AREA.
Protective Gloves:NEOPRENE OR PVA COATED
Eye Protection:CHEMICAL SPLASH GOGGLES
Other Protective Equipment:RUBBER APRON
Work Hygienic Practices:PRACTICE GOOD PERSONAL HYGIENE.
Supplemental Safety and Health

HCC:N1
Boiling Pt:B.P. Text:167F,75C
Melt/Freeze Pt:M.P/F.P Text:NA
Decomp Temp:Decomp Text:NP
Vapor Pres:ND
Vapor Density:ND
Spec Gravity:1.1
pH:NP
Viscosity:NP
Evaporation Rate & Reference:ND
Solubility in Water:HIGHLY SOLUBLE
Appearance and Odor:LIGHT YELLOW TO LIGHT AMBER W/SLIGHTLY SWEET ODOR
Percent Volatiles by Volume:NP
Corrosion Rate:NP

Stability Indicator/Materials to Avoid:YES
NONE KNOWN
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:HYDROGEN CHLORIDE, CARBON MONOXIDE,
PHOSGENE IN SMALL AMOUNTS.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE IWTH LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.