Product ID:A-1273-B-2, 3010660
MSDS Date:04/06/1995
FSC:8040
NIIN:00-940-7997
Status Code:A
Kit Part:Y
MSDS Number: CHXQM

Emergency Phone: 330-374-5143;800-424-9300(CHEMTREC)

Info Phone: 330-374-2786

Preparer: CLIFFORD PEARSON

Cage: MO326

Telephone: 330-374-2786 / 330-374-2900

Cage: 1HS43

NO INGREDIENT FOR THIS FORMULATION_INGREDIENT

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: SKIN: PROLONGED OR REPEATED
EXPOSURE MAY CAUSE MODERATE IRRITATION. MAY CAUSE ALLERGIC REACTION
AND SENSITIZATION IN SOME INDIVIDUALS. EYE: MODERATE TO SEVERE
IRRITATION. CHRONIC: EXPOSURE MAY CAUSE SOME PEOPLE TO DEVELOP
SKIN RASH,ALLERGIC REACTION AND/OR SKIN SENSITIZATION.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:ALLERGIC REACTION AND/OR SKIN
SENSITIZATION.

First Aid:SKIN: REMOVE CONTAMINATED CLOTHING; WASH AREA WITH PLENTY OF
SOAP AND WATER; SEE A PHYSICIAN IF IRRITATION DEVELOPS. EYE: FLUSH
WITH WATER FOR AT LEAST 15 MINUTES. SEE A PHYSICIAN IF IRRITATION
DEVELO PS. INGESTION: INDUCE VOMITING AND CONSULT A PHYSICIAN.
INHALATION: REMOVE TO FRESH AIR. GET MEDICAL ATTENTION IF
NECESSARY.

Flash Point Method:TOC
Flash Point:365F,185C
Upper Limits:6%
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . DO NOT ENTER CONFINED SPACE WITHOUT PROPER PROTECTIVE
EQUIPMENT.
Unusual Fire/Explosion Hazard:NONE KNOWN.

Spill Release Procedures:AVOID SKIN AND EYE CONTACT, SCRAPE UP AND
PLACE IN CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID PROLONGED SKIN & EYE CONTACT,
FOR INDUSTRIAL USE ONLY, KEEP OUT OF THE REACH OF CHILDREN. STORE
IN A COOL DRY PLACE, AWAY FROM SOURCES OF HEAT.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:NOT NORMALLY NEEDED. NIOSH APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST MAY BE NEEDED IF MATERIAL IS HEATED.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA . CLEAN LONG SLEEVE, LONG LEG CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
VAPOR DENSITY: NON VOLATILE.

Boiling Pt:B.P. Text:NONE
Melt/Freeze Pt:M.P/F.P Text:1.42
Vapor Pres:SEE ING 2
Vapor Density:SUPDAT
Spec Gravity:1.42497
Evaporation Rate & Reference:N-BUTYL ACETATE
Solubility in Water:1.42497
Appearance and Odor:LIGHT BROWN VISC. PASTE W/AMINE ODOR.
Percent Volatiles by Volume:0.0

Stability Indicator/Materials to Avoid:YES
EPOXY RESINS.
Stability Condition to Avoid:AVOID MIXING WITH LARGE AMOUNTS OF EPOXY
RESIN. NO MORE THAN TWO POUNDS.
Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE,
AMMONIA, OTHERS POSSIBLE.

Waste Disposal Methods:THIS MATERIAL IF DISCARDED MAY BE HAZARDOUS AS
DEFINED BY GOVERMENT REGULATIONS AND, THEREFORE MAY BE SUBJECT TO
STORAGE. TRANSPORTATION AND DISPOSAL REQUIREMENTS. DISCARD IN
ACCORDANCE WITH LOCAL, ST ATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.