CJLBM - T-204

  • MSDS: CJLBM
  • Manufacturer: ALCO PRODUCTS INC
  • Product Name: T-204
  • National Stock Number: 7930-00N066449
Product Identification

Product ID:T-204
MSDS Date:04/23/1998
FSC:7930
NIIN:00N066449
Status Code:A
MSDS Number: CJLBM

Responsible Party
ALCO PRODUCTS INC
13126 SATICOY STREET
NORTH HOLLYWOOD, CA 91605
US

Emergency Phone: (800)424-9300

Info Phone: 818-764-7700

Cage: 0AXK7

Contractor
ALCO PRODUCTS INC
NORTH HOLLYWOOD, CA 91605 US

Telephone: 818-764-7700

Cage: 0AXK7

Ingredients

D-LIMONENE MFR CAS#12759

CAS: 5989-27-5

RTECS: GW6360000

Hazards

Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: VAPOR IRRITATES EYE AND MUCOUS
MEMBRANES. SKIN CONTACT WITH LIQUID MAY CAUSE LOCALIZED ITCHING.
CHRONIC: FREQUENT EXPOSURE MAY INDUCE DERMATITIS IN SENSITIVE
INDIVIDUALS. PROLONGED CONTACT HAS CAUSES SENSITITIVITY IN SOME
CASES. OSHA PERMISSIBLE EXPOSURE LIMIT: NOT LISTED. ACGIH THRESHOLD
LIMIT VALUE: NOT LISTED.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE
OXYGEN/ARTIFICIAL RESPIRATION) . EYES: FLUSH WITH WATER FOR AT
LEAST 15 MINUTES. IF IRRITATION PERSISTS, SEE A PHYSICIAN. SKIN:
WASH WITH SOAP AND WATER. IF IRRATION PERSISTS, SEE A PHYSICIAN.
INGESTION: SEE A PHYSICIAN.

Fire Fighting

Flash Point Method:TCC
Flash Point:=45.C, 113.F
113-130F(45-54C)
Autoignition Temp:=237.2C, 459.F
Lower Limits:0.7%
Upper Limits:6.1%
Extinguishing Media:USE MEDIA FOR CLASS B FIRES: FOAM CO*2 OR DRY
COMPOUND. AVOID DIRECT CONTACT WITH WATER.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT . IF CONFINED IN A CONTAINER, COOL EXTERIOR WITH WATER
SPRAY.
Unusual Fire/Explosion Hazard:DENSE BLACK SMOKE PRODUCED. HAZARDOUS
PRODUCT OF COMBUSTION: NONE. NFPA HEALTH HAZARD RATING - 0. NFPA
CLASS II COMBUSTIBLE LIQUID.

Accidental Release

Spill Release Procedures:SHUT OFF SOURCE, IF POSSIBLE TO DO SO WITHOUT
HAZARD. KEEP OPEN FLAMES AND SPARK SOURCES AWAY. DO NOT ALLOW
LIQUID TO ENTER MUNICIPAL SEWAGE SYSTEM.

Handling

Handling and Storage Precautions:USUAL PRECS FOR COMBUST LIQS. STORE IN
SPRINKLERED WAREHOUSE. STORE IN COOL, WELL VENTD PLACE AWAY FROM
REACTIVE CHEMS, SPK SOURCES OR OPEN FLAMES. BEST TO STORE IN GLASS,
TIN-LINED, STAINLESS STEEL, OR EPOXY-LINED CNTNRS TO PRESERVE
QUALITY. CNTNRS SHOULD BE TIGHTLY SEALED, FULL & PLAINLY LABELED.
Other Precautions:PROD MAY EXPAND SLIGHTLY IN STORAGE CAUSING PRESS TO
BUILD IN CNTNR. OPEN CNTNR CAREFULLY IF PROD APPEARS TO BE UNDER
PRESS. DRUM LINING MAY OCCASNLY CHIP & FALL TO BOTTOM OF CNTNR
AFTER LONG STORAGE OR EXCESSIVE HNDLG. AS PREC, POUR LIQ THRU
FILTER/STRAINER TO CATCH SM PIECES OF LINER BEFORE BLENDI NG OR
(SUPDAT)

Exposure Controls

Respiratory Protection:USE NIOSH APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:MECHANICAL VENTILATION RECOMMENDED.
Protective Gloves:PROT GLOVES MADE OF NITRIL RUB (BEST), BUTYL RUB OR
POLYVINYL ALCOHOL.
Eye Protection:ANSI APPROVED CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYE WASH AND DELUGE SHOWER MEETING ANSI
DESIGN CRITERIA . NO OPEN FLAMES, SMOKING OR UNSHIELDED LIGHTS.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
OTHER PRECS: REPACKAGING. COMMERCIALLY CLEAN EMPTY CNTNRS BEFORE REUSE.
CAUTION: DO NOT WELD OR CUT EMPTY CNTNRS (VAPORS MAY IGNITE).

Chemical Properties

Boiling Pt:=170.6C, 339.F
B.P. Text:(@ 760 MM HG)
Vapor Pres:2 TORR @ 23C
Vapor Density:4.7(AIR=1)
Spec Gravity:0.85 @ 25C, H*2O=1
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR TO LIGHT YELLOW WITH MILD CITRUS ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENT, ACIDS, PEROXIDES, HALOGENS, VINYL CHLORIDE, IODINE
PENTAFLUORIDE.
Stability Condition to Avoid:AVOID CONTACT WITH INFLAMMABLE OR
EXPLOSIVE CHEMICALS.
Hazardous Decomposition Products:NONE.
Conditions to Avoid Polymerization:AVOID HIGH TEMPERATURE CONTACT WITH
REACTIVE MONOMERS (IE, METHACRYLATES OR VINYL CHLORIDE).

Disposal

Waste Disposal Methods:CONTAIN AND ABSORB SPILLED LIQUID WITH SAND OR
EARTH. REMOVE AGENT ABSORBENT AND DISPOSE IN ACCORDANCE TO STATE,
FEDERAL AND LOCAL DISPOSAL LAWS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.