CJVHK - N, N'-METHYLENEBISACRYLAMIDE, 7731

  • MSDS: CJVHK
  • Manufacturer: MALLINCKRODT BAKER INC
  • Product Name: N, N'-METHYLENEBISACRYLAMIDE, 7731
  • National Stock Number: -
Product Identification

Product ID:N, N'-METHYLENEBISACRYLAMIDE, 7731
MSDS Date:12/08/1996
FSC:NIIN:Submitter:N EN
Status Code:A
MSDS Number: CJVHK

Responsible Party
MALLINCKRODT BAKER INC
222 RED SCHOOL LANE
PHILLIPSBURG, NJ 08865
US

Emergency Phone: 908-859-2151

Info Phone: 800-582-2537

Cage: 70829

Contractor
MALLINCKRODT BAKER, INC.
PHILLIPSBURG, NJ 08865 US

Telephone: 800-582-2537

Cage: 70829

Ingredients

(ORAL,RAT) 390 MG/KG.

CAS: 110-26-9

Hazards

LD50 LC50 Mixture:SEE INGREDIENTS.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: WARNING! HARMFUL IF SWALLOWED.
MAY BE HARMFUL IF INHALED OR ABSORBED THROUGH SKIN. CAUSES
IRRITATION TO SKIN, EYES AND RESPIRATORY TRACT. MAY AFFECT CENTRAL
NERVOUS SYSTEM. THERE IS LIMITED INF ORMATION AVAILABLE ON THE
HAZARDS OF THIS CHEMICAL. IT IS ASSUMED THAT IT WILL BEHAVE
SIMILARLY TO OTHER UNSATURATED AMIDES. INHALATION: DUST INHALATION
OF UNSATURATED AMIDES MAY CAUSE DROWSINESS, TIN GLING SENSATIONS,
FATGUE, WEAKNESS, STUMBLING, SLURRED SPEECH & SHAKING. INHALATION
STUDIES WITH THIS COMPOUND HAS PRODUCED ACUTE PULMONARY EDEMA IN
ANIMALS. EFFECTS IN HUMANS NOT KNOWN. INGESTION: TO XIC!
UNSATURATED AMIDES(EFTS OF OVEREXP)
Explanation of Carcinogenicity:N,N'-METHYLENEBISACRYLAMIDE (110-26-9):
NTP CARCINOGEN - KNOWN: NO; ANTICIPATED: NO; IARC CATETORY: NONE.
Effects of Overexposure:HLTH HAZS: CAUSE SYSTEMIC POISONING WITH
SYMPTOMS INCLUDING DROWSINESS, TINGLING SENSATIONS, FATIGUE,
WEAKNESS, STUMBLING, SLURRED SPEECH AND SHAKING. SKIN CONTACT:
UNSATURATED AMIDES CAUSE IRRITATION AND REDNESS. SOLUTIONS MAY BE
ABSORBED THROUGH SKIN CAUSING SYSTEMIC POISONING; SYMPTOMS MAY
PARALLEL INGESTION. EYE CONTACT: CAUSES IRRITATION, REDNESS AND
PAIN. CHRONIC: PROLONGED OR REPEATED EXPOS URE TO UNSATURATED
AMIDES THROUGH ANY ROUTE MAY CAUSE MUSCULAR WEAKNESS,
INCOORDINATION, SKIN RASHES, EXCESSIVE SWEATING OF HANDS AND FEET,
COLD HANDS AND PEELING OF SKIN.
Medical Cond Aggravated by Exposure:PERSONS WITH PRE-EXISTING SKIN
DISORDERS, EYE PROBLEMS OR CENTRAL OR PERIPHERAL NERVOUS SYSTEM
CONDITIONS MAY BE MORE SUSCEPTIBLE TO THE EFFECTS OF THIS
SUBSTANCE.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. IF NOT BREATHING GIVE
ARTIFICIAL RESPIRATION. IF BREATHING IS DIFFICULT, GIVE OXYGEN.
CALL MD. INGESTION: GIVE LARGE AMOUNTS OF WATER TO DRINK. NEVER
GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. GET MEDICAL
ATTENTION. SKIN: IMMEDIATELY FLUSH WITH PLENTY OF SOAP WATER FOR AT
LEAST 15 MINUTES WHILE REMOVING CONTAMINATED CLOTHING AND SHOES.
WASH CLOTHING BEFORE RE USE. CALL MD. EYES: IMMEDIATELY FLUSH WITH
PLENTY OF WATER FOR AT LEAST 15 MINUTES, LIFTING LOWER AND UPPER
EYELIDS OCCASIONALLY. GET MEDICAL ATTENTION IMMEDIATELY.

Fire Fighting

Extinguishing Media:WATER SPRAY, DRY CHEMICAL, ALCOHOL FOAM, OR CARBON
DIOXIDE. DO NOT USE HIGH PRESSURE WATER STREAM.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:AS WITH MOST ORGANIC SOLIDS, FIRE IS
POSSIBLE AT ELEVATED TEMPERATURES OR BY CONTACT WITH AN IGNITION
SOURCE. NOT CONSIDERED TO BE AN EXPLOSION HAZARD. NFPA RATINGS:
HEALTH - 2; FLAMMABILITY - 1; REAC TIVITY - 0.

Accidental Release

Spill Release Procedures:VENTILATE AREA. WEAR APPROPRIATE PERSONAL
PROTECTIVE EQUIPMENT AS SPECIFIED IN THIS MSDS. SPILLS: PICK UP AND
PLACE IN A SUITABLE CONTAINER FOR RECLAMATION OR DISPOSAL, USING A
METHOD THAT DOES NOT GE NERATE DUST.

Handling

Handling and Storage Precautions:STORAGE COLOR CODE: WHITE (CORROSIVE).
KEEP IN A TIGHTLY CLOSED CONTAINER. STORE IN A COOL, DRY,
VENTILATED AREA AWAY FROM SOURCES OF HEAT OR IGNITION. PROTECT
CONTAINER FROM PHYSICAL DAMAGE. ISOLATE FROM OXIDIZING MATERIALS.
AVOID BREATHING DUST. AVOID CONTACT WITH EYES, SKIN AND CLOTHING.
Other Precautions:USE ONLY WITH ADEQUATE VENTILATION. CONTAINERS OF
THIS MATERIAL MAY BE HAZARDOUS WHEN EMPTY SINCE THEY RETAIN PRODUCT
RESIDUES (DUST, SOLIDS); OBSERVE ALL WARNINGS AND PRECAUTIONS
LISTED FOR THE PRODU CT.

Exposure Controls

Respiratory Protection:FOR CONDITIONS OF USE WHERE EXPOSURE TO THE
DUST/MIST IS APPARENT, A NIOSH APPROVED HALF-FACE DUST/MIST
RESPIRATOR MAY BE WORN. FOR EMERGENCIES/INSTANCES WHERE THE
EXPOSURE LEVELS ARE NOT KNOWN, USE A NIOSH APPROVED FULL-FACE
POSITIVE-PRESSURE, AIR-SUPPLIED RESPIRATOR. WARNING: AIR-PURIFYING
RESPIRATORS DO NOT PROTECT WORKERS IN OXYGEN-DEFICIENT ATMOSPHERES.
Ventilation:SYS OF LOC &/OR GEN EXHST IS REC TO KEEP EMPLOYEE EXPOS AS
LOW AS POSS. LOC EXHST VENT IS GENERALLY PREF BECAUSE IT CAN
CONTROL EMISSIONS OF CONTAM AT (SUPDAT)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEMICAL WORKERS GOGGLES & FULL LENGTH
FACESHIELD .
Other Protective Equipment:ANSI APPROVED EMERGENCY EYEWASH AND DELUGE
SHOWER . WEAR IMPERVIOUS PROTECTIVE CLOTHING, INCLUDING BOOTS, LAB
COAT, APRON OR COVERALLS, AS APPROPRIATE, TO PREVENT SKIN CONTACT.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
PHYSICAL & CHEM PROPERTIES: VAP DENS: 5.31 (AIR=1). -- VENT: ITS
SOURCE, PREVENTING DISPERSION OF IT INTO GEN WORK AREA. PLEASE
REFER TO ACGIH DOCUMENT, "INDUS VENT, A MANUAL OF REC PRACTICES",
MOST R ECENT EDITION, FOR DETAILS. VENT HOOD.

Chemical Properties

Boiling Pt:B.P. Text:NO INFORMATION FOUND
Melt/Freeze Pt:>300.C, 572.F
Vapor Pres:NO INFORMATION FOUND
Vapor Density:SUPDAT
Spec Gravity:1.24 @ 20C (86F)
pH:NO INFO FOUND
Evaporation Rate & Reference:NO INFO FOUND (BUAC=1)
Solubility in Water:SLIGHTLY SOLUBLE (0.1-1%)
Appearance and Odor:FINE WHITE CRYSTALS OR CRYSTALLINE; NEUTRAL
ODOR/ODORLESS.
Percent Volatiles by Volume:0 @ 21C/70F

Stability

Stability Indicator/Materials to Avoid:YES
STRONG BASES, STRONG ACIDS AND OXIDIZING AGENTS.
Stability Condition to Avoid:STABLE UNDER ORDINARY CONDITIONS OF USE
AND STORAGE. AVOID HEAT, FLAMES, IGNITION SOURCES AND
INCOMPATIBLES.
Hazardous Decomposition Products:BURNING MAY PRODUCE CARBON MONOXIDE,
CARBON DIOXIDE, NITROGEN OXIDES.
Conditions to Avoid Polymerization:WILL NOT OCCUR. OXIDIZING AGENTS MAY
INITIATE NON-HAZARDOUS POLYMERIZATION.

Disposal

Waste Disposal Methods:WHATEVER CANNOT BE SAVED FOR RECOVERY/RECYCLING
SHOULD BE MANAGED IN APPROPRIATE & APPRVD WASTE DISPOSAL FACILITY.
PROCESSING, USE/CONTAMINATION OF PROD MAY CHANGE WASTE MANAGEMENT
OPTIONS. STATE & LO CAL DISPOSAL REGULATIONS MAY DIFFER FROM
FEDERAL DISPOSAL REGULATIONS. DISPOSE OF CONTAINER & UNUSED
CONTENTS I/A/W FEDERAL, STATE & LOC REQUIREMENTS.

Toxicology

Toxicological Information:N,N'-METHYLENEBISACRYLAMIDE: INVESTIGATED AS
A MUTAGEN, REPRODUCTIVE EFFECTOR.

Other Information

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ecology

Ecological:ENVIRONMENTAL FATE: NO INFORMATION FOUND. ENVIRONMENTAL
TOXICITY: NO INFORMATION FOUND.

Transport

Transport Information:NOT REGULATED.

Regulatory

SARA Title III Information:N,N'-METHYLENEBISACRYLAMIDE (110-26-9): SARA
302 RQ/TPQ: NO. SARA 313 LIST/CHEMICAL CATEGORY: NO. CERCLA: NO.
SARA 311/312: ACUTE: YES; CHRONIC: YES; FIRE: NO; PRESSURE: NO;
REACTIVITY: NO (PURE/SOLID ).
Federal Regulatory Information:N,N'-METHYLENEBISACRYLAMIDE (110-26-9):
TSCA, EC, JAPAN, AUSTRALIA: YES. CANADA: KOREA, NDSL: NO; DSL,
PHILIPPINES: YES. RCRA 261.33: NO. TSCA 8 (D): NO. CHEMICAL WEAPONS
CONVENTION: NO. TSCA 12 (B): NO. CDTA: NO. AUSTRALIAN HAZCHEM
CODE: NO INFORMATION FOUND. POISON SCHEDULE: NO INFORMATION FOUND.
WHMIS: THIS MSDS HAS BEEN PREPARED ACCORDING TO THE HAZARD CRITERIA
OF THE CONTROLLED PRODUCTS REGUL ATIONS (CPR) AND THE MSDS CONTAINS
ALL OF THE INFORMATION REQUIRED BY THE CPR.