BBBKB - BLOCK ALLOY 117F
- MSDS: BBBKB
- Manufacturer: COBURN OPTICAL INDUSTRIES INC
- Product Name: BLOCK ALLOY 117F
- National Stock Number: 6850-00B030043
Product Identification
Product ID:BLOCK ALLOY 117F
MSDS Date:09/21/1987
FSC:6850
NIIN:00B030043
MSDS Number: BBBKB
Responsible Party
US
Info Phone: 918683-4521
Cage: 89756
Contractor
Telephone: 918683-4521
Cage: 89756
Ingredients
BISMUTH TELLURIDE, SELENIUM DOPED
CAS: 1304-82-1
RTECS: EB3110000
Fraction By Weight: 44.7%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3; 9394
LEAD (SARA III)
CAS: 7439-92-1
RTECS: OF7525000
Fraction By Weight: 22.6%
OSHA PEL 0.05 MG/M3;1910.1025
ACGIH TLV: 0.15 MG/M3;DUST 9192
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
TIN
CAS: 7440-31-5
RTECS: XP7320000
Fraction By Weight: 8.3%
OSHA PEL 2 MG/M3
ACGIH TLV: 2 MG/M3; 9192
CADMIUM (SARA III)
CAS: 7440-43-9
RTECS: EU9800000
Fraction By Weight: 5.3%
OSHA PEL SEE 1910.1027
ACGIH TLV: 0.01 MG/M3 DUST;9394
EPA Report Quantity: 10 LBS
DOT Report Quantity: 10 LBS
INDIUM
CAS: 7440-74-6
RTECS: NL1050000
Fraction By Weight: 19.1%
OSHA PEL 0.1 MG/M3
ACGIH TLV: 0.1 MG/M3; 9192
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES
Effects of Overexposure:POSSIBLE EFFECTS OF OVEREXPOSURE MIGHT BE
GASTROINTESTINAL DISORDERS,COLIC,CONSTIPATION,LUNG IRRITATION,LUNG
INJURY(EMPHYSEMA)AND KIDNEY DYSFUNCTION.
First Aid
First Aid:IF THERE HAS BEEN KNOWN EXPOSURE TO DENSE FUME OR IF SYMPTOMS
OF COUGH,CHEST TIGHTNESS,OR RESPIRATORY DISTRESS APPEAR AFTER
POSSIBLE EXPOSURE PLACE PT AT BED REST AND CALL A PHYSICIAN.KEEP
PATIENT UND ER OBSERVATION FOR 48 HOURS.
Fire Fighting
Extinguishing Media:ANY
Fire Fighting Procedures:AT EXTREME HEAT TOXIC FUMES MAY BE
EVOLVED.THEREFORE WEAR RESPIRATORY PROTECTION AND FULL PROTECTIVE
CLOTHING.
Accidental Release
Spill Release Procedures:ANY NORMAL CLEAN-UP PROCEDURE IS APPLICABLE.IF
THERE IS THE POSSIBILITY OF DUST FUME EXPOSURE,APPROVED RESPIRATORY
EQUIPMENT SHOULD BE WORN.
Exposure Controls
Ventilation:LOCAL EXHAUST RECOMMENDED
Eye Protection:RECOMMENDED,NOT REQUIRED
Other Protective Equipment:WHEN GRINDING OR WORKING WITH MOLTEN FUSIBLE
ALLOY PROVIDE LOCAL EXHAUST VENTILATION.
Supplemental Safety and Health
Stability
Stability Indicator/Materials to Avoid:YES
AT RED HEAT TEMPERATURE,LEAD FUME AND CADMIUM OXIDE FUME MAY BE
EVOLVED.
Disposal
Waste Disposal Methods:DISPOSE OF MATERIAL IN CLOSED CONTAINERS.BE
COGNIZANT OF POTENTIAL AIR AND WATER POLLUTION PROBLEMS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.