Product ID:F-501 FILM CORRECTIVE LIQUID
MSDS Date:01/01/1985
FSC:6750
NIIN:00D000426
MSDS Number: BBCRC

PICLEAR INC.

Emergency Phone: 914-698-0258

Cage: 9L468

PICLEAR INC.

Cage: 9L468

METHYL CHLOROFORM (1,1,1-TRICHLOROEHANE) (SARA III)

CAS: 71-55-6

RTECS: KJ2975000

Fraction By Weight: 50%.

OSHA PEL 350 PPM/450 STEL

ACGIH TLV: 350 PPM/450STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

PERCHLOROETHYLENE (TETRACHLOROETHYLENE) (SARA III)

CAS: 127-18-4

RTECS: KX3850000

Fraction By Weight: 50%.

OSHA PEL 100 PPM

ACGIH TLV: 25PPM/100,A3 STEL;94

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

Effects of Overexposure:INHALAT: ANESTHETIC EFFECT,HEADACHE,DIZZINESS;
SKIN: IRRITATES IF PROLONGED EXPOS; EYE: IRRITATES

First Aid:INHAL:REMOVE TO FRESH AIR; ADMINISTER OXYGEN FOR OXYGEN
SHORTAGE; SEE DOCTOR; SKIN:WASH W/SOAP & WATER; EYE: IRRIGATE
W/WATER.; INGESTION: GASTRIC LAVAGE FOLLOWED BY SALINE CATHARSIS.

Flash Point:NONE
Extinguishing Media:NON FLAMM.-USE WATER TO KEEP CONTAINERS COOL DURING
FIRE.
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING EQPT. TO AVOID
TOXIC VAPORS
Unusual Fire/Explosion Hazard:POISON GAS(CHLORINE,PHOSGENE, CARBON
MONOXIDE) MAY EVOLVE IF DECOMPOSTION OCCURS.

Spill Release Procedures:ABSORB WITH APPROPRIATE MATERIAL & ALLLOW
RESIDUE TO EVAPORATE.(ABSORBENTS SUCH AS: PAPER OR CLOTH TOWELS)

Handling and Storage Precautions:ORDINARY CARE TO PREVENT PUNCTURE OF
CONTAINERS.
Other Precautions:PROLONGED IMMERSION OF HANDS WILL REMOVE SOME SKIN
OILS & COULD CAUSE CHAPPING AND/OR MINOR IRRITATION.

Respiratory Protection:NOT REQUIRED;RECOMMENDED IF TLV LEVELS EXCEEDED
Ventilation:SUFFICIENT VENTILATION LEVELS TO MAINTAIN AIR QUALITY < TLV
Protective Gloves:RECOMMENDED
Eye Protection:RECOMMENDED
Other Protective Equipment:AS NECESSARY TO PREVENT PROLONGED/EXCESS
EXPOSURE
Supplemental Safety and Health

HCC:T4
Boiling Pt:B.P. Text:208 F.
Vapor Density:5.7
Spec Gravity:1.46
Solubility in Water:INSOLUBILE
Appearance and Odor:COLORLESS LIQUID
Percent Volatiles by Volume:>50

Stability Indicator/Materials to Avoid:YES
SOFTENS SOME PLASTICS
Stability Condition to Avoid:SOURCES OF HOT METALS WHERE MATERIAL WILL
DECOMPOSE
Hazardous Decomposition Products:HCL,PHOSGENE,CARBON MONOXIDE FOR TEMP.
> 600 F.

Waste Disposal Methods:PURIFTY BY DISTILLATION OR RETURN TO SUPPLIER

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.