Product ID:400-0003,REPRLITH LITHGRAPHC DEVLPR,PART A
MSDS Date:01/01/1985
FSC:6750
NIIN:00D000649
MSDS Number: BBDBY

ANITEC IMAGE CORPORATION

Emergency Phone: (607) 774-3300

Cage: 61263

ANITEC IMAGE CORP

4444 BINGHAMTON, NY 13902 US

Telephone: 607-774-3333

Cage: 61263

SODIUM FORMALDEHYDE BISULFITE

Fraction By Weight: 27.5%

HYDROQUINONE (SARA III)

CAS: 123-31-9

RTECS: MX3500000

Fraction By Weight: 9.2%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

AQUEOUS SOLUTION,HAZARD UNKNOWN,UNIDENTIFIED;% WT BY

Fraction By Weight: 63.3%

Effects of Overexposure:MAY CAUSE IRRITATION TO SKIN OR EYES.

First Aid:EYES:FLUSH WITH PLENTY OF WATER AT LEAST FOR 15 MIN & GET MED
ATTN;SKIN:FLUSH/WASH W/PLENTY OF H*20.IF IRRITATION OCCURS,GET MED
HELP;

Flash Point:NONE
Extinguishing Media:CO*2, FOAM, DRY CHEM.
Fire Fighting Procedures:WEAR SELF-CNTD BRTHG APP H*20 SPRAY TO COOL
CONTR.

Spill Release Procedures:EVACUATE UNPROTECTED PERSONS. STOP LEAK. H*2O
SPRAY TO COOL CONT/DIVERT SPILL FROM FIRE/HEAT. PROVIDE
VENTILATION. ABSORB W COMMERCIAL ABSORBENT,SHOVEL INTO METAL DRUMS.
LG SPILL:DIKE W COMMERCIAL ABS ORBENT, PUMP INTO COVERED DRUMS.

Handling and Storage Precautions:STORE IN COOL DRY WELL VENTILATED
AREA;KEEP CONTAINER TIGHTLY CLOSED;WASH THOROUGHLY AFTER HANDLING.
Other Precautions:NONE

Respiratory Protection:NO SPECIAL REQMNTS UNDER ORDINARY
CONDITIONS/ADEQUATE VENT.
Ventilation:MECHANICAL(GENERAL) RECOMMENDED,LOCAL EXHAUST IF NEEDED
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:WEAR IMPERVIOUS APRON/CLOTHING TO PREVENT
CONTACT.
Supplemental Safety and Health
PART A OF 2 PART PRODUCT:OLD P/N 5202-609 WHICH WAS USED BY GAF CORP
BEFORE ITEM TRANSFER TO ANITEC CORP:SEE P/N IND "A" FOR PART B DATA
UNDER 6750-00-D00

Boiling Pt:B.P. Text:210F
Spec Gravity:1.232
Solubility in Water:COMPLETE
Appearance and Odor:CONCENTRATE LIQUID,PUNGENT ODOR.

Stability Indicator/Materials to Avoid:YES
NO SPECIFIC INCOMPATIBILITY.
Stability Condition to Avoid:NONE KNOWN

Waste Disposal Methods:KEEP IN COVERED DRUMS,PENDING DISPOSAL. HANDLE &
DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL,FEDERAL,STATE, & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.