Product ID:402-0065,REPROMATC RAPID ACCSS FIXER,PART A
MSDS Date:01/01/1985
FSC:6750
NIIN:00D000658
MSDS Number: BBDCJ

ANITEC IMAGE CORPORATION

Emergency Phone: (607)774-3300

Cage: 61263

ANITEC IMAGE CORP

4444 BINGHAMTON, NY 13902 US

Telephone: 607-774-3333

Cage: 61263

AQUEOUS SOLUTION,HAZARD UNKNOWN,UNIDENTIFIED;% WT BY

Fraction By Weight: 52.3%

AMMONIUM THIOSULFATE;CAS #7783-18-8

CAS: 7783-18-8

RTECS: XN6465000

Fraction By Weight: 44.2%

ACETIC ACID (SARA III)

CAS: 64-19-7

RTECS: AF1225000

Fraction By Weight: 3.5%

OSHA PEL 10 PPM

ACGIH TLV: 10 PPM/15 STEL; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Effects of Overexposure:MAY CAUSE SKIN &/OR EYE IRRITATION ON DIRECT
CONTACT.

First Aid:EYES:FLUSH WITH PLENTY OF WATER AT LEAST FOR 14 MIN & GET MED
ATTN;SKIN:FLUSH/WASH W/PLENTY OF H*20.IF IRRITATION OCCURS,GET MED
HELP.

Flash Point:NONE
Extinguishing Media:CO*2, FOAM, DRY CHEM.
Fire Fighting Procedures:WEAR SELF-CNTD BRTHG,APP H*20 SPRAY TO COOL
CONTR.
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:EVACUATE UNPROTECTED PERSONS. STOP LEAK. H*2O
SPRAY TO COOL CONT/DIVERT SPILL FROM FIRE/HEAT. PROVIDE
VENTILATION. ABSORB W COMMERCIAL ABSORBENT,SHOVEL INTO METAL DRUMS.
LG SPILL:DIKE W COMMERCIAL ABS ORBENT, PUMP INTO COVERED DRUMS.

Handling and Storage Precautions:STORE IN COOL WELL VENTILATED
AREA;KEEPCONTAINER TIGHTLY CLOSED;WASH THOROUGHLY AFTER HANDLING.
Other Precautions:WASH AFTER HANDLING;PH OF PRODUCT AT 25C
APPROXIMATELY:5.40

Respiratory Protection:NO SPECIAL REQMNTS UNDER ORDINARY
CONDITIONS/ADEQUATE VENT.
Ventilation:MECHANICAL(GENERAL):SATISFACTORY
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GOGG W/SIDE SHIELD
Other Protective Equipment:WEAR IMPERVIOUS APRON/CLOTHING TO PREVENT
CONTACT.
Supplemental Safety and Health
PART A OF 2 PART PRODUCT:PH AT 25C =5.40;MSDS NOT DATED.KEY1:N1.

Boiling Pt:B.P. Text:210F
Spec Gravity:1.320
Solubility in Water:COMPLETE
Appearance and Odor:CONCENTRATED LIQUID,MILD ODOR

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:NONE KNOWN

Waste Disposal Methods:KEEP IN COVERED DRUMS,PENDING DISPOSAL. HANDLE &
DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL,FEDERAL,STATE, & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.