Product ID:402-0065,REPROMATC RAPID ACCSS FIXER,PART B
MSDS Date:01/01/1985
FSC:6750
NIIN:00D000658
MSDS Number: BBDCK

ANTITEC IMAGE CORPORATION

40 CHARLES ST
BINGHAMTON, NY 13902
US

Cage: EO012

ANTITEC IMAGE CORPORATION

4444 BINGHAMTON, NY 13902 US

Telephone: 607-774-3333

Cage: EO012

ACETIC ACID (SARA III)

CAS: 64-19-7

RTECS: AF1225000

Fraction By Weight: 78.4%

OSHA PEL 10 PPM

ACGIH TLV: 10 PPM/15 STEL; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

AQUEOUS SOLUTION,HAZARD UNKNOWN,UNIDENTIFIED;% WT BY

Fraction By Weight: 21.6%

Effects of Overexposure:SKIN:CAUSES IRRIT/BURNS;EYES:CORROSIVE,CAUSES
BURNS;ING:CAUSES BURNS.

First Aid:EYES:FLUSH WITH PLENTY OF WATER AT LEAST FOR 15 MIN & GET MED
ATTN;SKIN:FLUSH/WASH W/PLENTY OF H*20.IF IRRITATION OCCURS,GET MED
HELP;INGESTION:GASTRIC LAVAGE WITH LIMEWATER FOLLOWED BY
ADMINISTRATION TO DEMULCENTS.GET MED ATTN IMMEDIATELY.

Flash Point:165-OC
Lower Limits:UNK
Upper Limits:UNK
Extinguishing Media:WSATER SPRAY,DRY CHEMICAL,ALCOHOL FOAM OR CARBON
DIOXIDE.
Fire Fighting Procedures:USE H*20 TO COOL EXPD CONTRS. USE SCBA & FULL
PROT.CLTHG.
Unusual Fire/Explosion Hazard:NONE KNOWN

Spill Release Procedures:PER MFR,COVER W/SODA ASH OR NAHCO*3.MIX
W/H*2O.NEUTRALIZE.

Handling and Storage Precautions:STORE IN COOL DRY WELL VENTILATED
AREA;KEEP CONTAINER TIGHTLY CLOSED;WASH THOROUGHLY AFTER HANDLING.
Other Precautions:OPEN IN WELL VENTILATED AREA.

Respiratory Protection:MECHANICAL-CHEMICAL FILTER RESPIRATOR
Ventilation:LOCAL EXHAUST TO MAINTN BELOW TLV.
Protective Gloves:IMPERVIOUS
Eye Protection:CHEM SPLASH GOGGLES
Supplemental Safety and Health
THIS IS PART B OF 2 PART PRODUCT;PH OF PROD AT 25C= 0.0 TO 1.0;

HCC:C1
Boiling Pt:B.P. Text:212F/100C
Vapor Pres:400
Vapor Density:2.07
Spec Gravity:1.070
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR COLORLESS LIQUID WITH PUNGENT ODOR.
Percent Volatiles by Volume:78.0

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS(SOD PEROXIDE,CHROMIC ACID,HNO*3 & FLAMM LIQ
Stability Condition to Avoid:NONE KNOWN

Waste Disposal Methods:KEEP IN COVERED DRUMS,PENDING DISPOSAL. HANDLE &
DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL,FEDERAL,STATE, & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.