Product ID:FIXER TANK SYSTEMS CLEANER
MSDS Date:01/01/1985
FSC:6750
NIIN:00D000661
MSDS Number: BBDCN

ANITEC IMAGE CORPORATION

40 CHARLES ST
BINGHAMTON, NY 13902
US

Cage: 61263

ANITEC IMAGE CORP

4444 BINGHAMTON, NY 13902 US

Telephone: 607-774-3333

Cage: 61263

SODIUM HYDROXIDE (SARA III)

CAS: 1310-73-2

RTECS: WB4900000

Fraction By Weight: 19.8%

OSHA PEL 2 MG/M3

ACGIH TLV: C 2 MG/M3; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

AQUEOUS SOLUTION,HAZARD UNKNOWN,UNIDENTIFIED;% WT BY

Fraction By Weight: 80.2%

Effects of Overexposure:EYES/SKIN:CAUSES SEVERE BURNS;INH:FUMES CAUSE
RESPIRATORY DAMAGE;ING:SEV DAMAGE TO MUCUS MEMBRANES.

First Aid:EYES:FLUSH WITH PLENTY OF WATER AT LEAST FOR 15 MIN & GET MED
ATTN;SKIN:FLUSH/WASH W/PLENTY OF H*2O.IF IRRITATION OCCURS,GET MED
HELP;INGESTION:IF INGESTED,DO NOT INDUCE VOMITING.GIVE LARGE
QUANTITIES OF WATER.CALL PHYSICIAN.

Flash Point:NONE
Extinguishing Media:CO*2, FOAM, DRY CHEM.
Fire Fighting Procedures:WEAR CHEMICAL PROTECTIVE SUIT WITH SELF CONTD
BRTHG APP.
Unusual Fire/Explosion Hazard:CAN REACT W/CHEMICALLY REACTIVE METALS
SUCH AS AL,CU,ZN,ETC.TO GIVE H*2 GAS WHICH FORM EXPLSV MIXTUR

Spill Release Procedures:ELIM IGNITION SOURCES.EVACUATE UNPROTECTED
PERSONS.AVOID CONTACT.CONTAIN SPILL.NEUTRALIZE SODIUM BISULFITE 5%
SOLUTION(5 LBS/100 GALS OF WATER);COVER W/AN INERT ABSORBENT
MATERIAL.PLACE IN CLOSED DISP OSAL CONTAINER.

Handling and Storage Precautions:STORE IN COOL DRY WELL VENTILATED AREA
ABOVE 40F(4.4C);KEEP CLOSURES TIGHTLY CLOSED.
Other Precautions:WASH HANDS THOROUGHLY AFTER USE.

Respiratory Protection:FULL FACE RESPIRATOR
Ventilation:MECH(GEN)OR LOCAL EXHAUST THAT PROVIDES ADEQUATE
VENTILATION
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:WEAR IMPERVIOUS APRON/CLOTHING TO PREVENT
CONTACT.
Supplemental Safety and Health
PH OF SOLUTION:13.0MSDS NOT DATED:NO CATALOG NUMBER AVAILABLE

HCC:C2
Spec Gravity:1.468
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR,COLORLESS CONCENTRATED LIQUID

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W REACTV METALS,ORGNIC MATLS & STRONG ACIDS.
Stability Condition to Avoid:NONE KNOWN

Waste Disposal Methods:KEEP IN COVERED DRUMS,PENDING DISPOSAL. HANDLE &
DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL,FEDERAL,STATE, & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.