BBDDX - RTV SILICONE RUBBER SWS-833

  • MSDS: BBDDX
  • Manufacturer: SWS SILICONES CORP
  • Product Name: RTV SILICONE RUBBER SWS-833
  • National Stock Number: 6850-00D000695
Product Identification

Product ID:RTV SILICONE RUBBER SWS-833
MSDS Date:01/01/1985
FSC:6850
NIIN:00D000695
MSDS Number: BBDDX

Responsible Party
SWS SILICONES CORPORATION

Emergency Phone: 517-262-5711

Cage: EO020

Contractor
SWS SILICONES DIVISION OF STAUFFER CHEMICAL CO
MATAWAN, NJ 07747-1245 US

Cage: 07607

Ingredients

SILICONE COMPOUND

Fraction By Weight: UNK


FILLERS,UNSPECIFIED

Fraction By Weight: UNK


CURING AGENT.

Fraction By Weight: UNK

Hazards

Effects of Overexposure:SLIGHT OR NONE ON NORMAL CONTACT.

First Aid

First Aid:SKIN:WASH WITH SOAP AND WATER. EYES: FLUSH WITH WATER.
INHALED: REMOVE TO FRESH AIR. REMOVE CONTAMINATED CLOTHING.

Fire Fighting

Flash Point:500F/260C COC
Extinguishing Media:CO*2, FOAM, DRY CHEM & H*2O FOG.
Fire Fighting Procedures:WEAR SELF-CNTND BRTHG APP WATER CAUSES
FROTHING.
Unusual Fire/Explosion Hazard:NONE NOTED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:SCOOP UP EXCESS.COVER RESIDUE WITH DRY
POWDER.MIX THEN,SWEEP UP.REMOVE REMAING DUST OR POWDER WITH SAWDUST
SWEEPING COMPOUND.IF CATALYZED MIX IS SPILLED,SCRAPE OFF QUICKLY &
REMOVE REMAINDER WITH A NO N-FLAMMABLE.

Handling

Handling and Storage Precautions:STORE IN COOL DRY,LOW FIRE RISK
AREA.AVOID CONTACT OF CATALYZED MATERIAL WITH CLOTHING.
Other Precautions:CLEAN UP SPILLS THOROUGHLY AS RESIDUE IS SLIPPERY.

Exposure Controls

Respiratory Protection:NONE SHOULD BE NEEDED
Ventilation:LOCAL EXHAUST
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES
Other Protective Equipment:A LABORATORY COAT OR APRON RECOMMENDED TO
PROTECT CLOTHING.
Supplemental Safety and Health

Chemical Properties

HCC:N1
Spec Gravity:1.51
Evaporation Rate & Reference:N/A(SOLID)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:SOLID,VERY LITTLE ODOR.
Percent Volatiles by Volume:NIL

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:NONE NOTED,BUT EXPECT CO, CO*2, H*2O
SMOKE.
Conditions to Avoid Polymerization:DO NOT MIX WITH CURING AGENT UNTIL
READY TO USE.

Disposal

Waste Disposal Methods:ELIMINATE IGNITION SOURCES. DESTROY BY LIQUID
INCINERATION. INCINERATION WILL BE EASIER BY MIXING WITH A MORE
FLAMMABLE SOLVENT. HANDLE & DISPOSE IN FULL COMPLIANCE WITH ALL
APPLICABLE INTERNATIONAL,F ED,STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.