BBDDY - 13873 P & H-325,HYDROGEN PEROXIDE 30%
- MSDS: BBDDY
- Manufacturer: FISHER SCIENTIFIC COMPANY
- Product Name: 13873 P & H-325,HYDROGEN PEROXIDE 30%
- National Stock Number: 6810-00D000696
Product Identification
Product ID:13873 P & H-325,HYDROGEN PEROXIDE 30%
MSDS Date:01/01/1985
FSC:6810
NIIN:00D000696
MSDS Number: BBDDY
Responsible Party
SPRINGFIELD, NJ 07081-3116
US
Emergency Phone: 201-379-1400
Info Phone: 201-379-1400
Cage: 94480
Contractor
Telephone: 201-796-7100
Cage: 94480
Ingredients
HYDROGEN PEROXIDE (SARA III)
CAS: 7722-84-1
RTECS: MX0900000
Fraction By Weight: 30%
OSHA PEL 1 PPM
ACGIH TLV: 1 PPM; 9192
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 70 - 75%
Hazards
Effects of Overexposure:CAUSES EYE INJURY,EFFECTS MAY BE DELAYED.CAUSES
IRRITATIONS.
First Aid
First Aid:INHALED:REMOVE TO FRESH AIR. GIVE CPR OR OXYGEN IF NEED
(CAUTION:CPR MAY EXPOSE RESCUER)EYES/SKIN: FLUSH W.WATER 15 MIN.
REMOVE CONTAMINATED CLOTHES.KEEP WARM/QUIET. GET MEDICAL ATTENTION
Fire Fighting
Extinguishing Media:WATER ONLY
Fire Fighting Procedures:IF INVOLVED IN FIRE.
Unusual Fire/Explosion Hazard:STRONG OXIDIZER FIRE AND EXPLOSIVE HAXARD
ON CONTACT WITH ORGANIC MATERIAL
Accidental Release
Spill Release Procedures:ELIMINATE IGNITION SOURCES. STOP LEAK.
EVACUATE AREA.DO NOT TOUCH SPILLAGE. SM SPILL:ABSORB W. INERT
ABSORBENT. PLACE IN CLOSED CONTAINER. FLUSH AREA W. WATER. LG
SPILL: DIKE AHEAD FOR LATER DISPOSAL. NOTIFY AUTHORITIES.
Handling
Handling and Storage Precautions:STORE IN COOL,DARK PLACE.
Other Precautions:NONE
Exposure Controls
Respiratory Protection:NONE SHOULD BE NEEDED
Ventilation:NO SPECIAL REQUIREMENTS W ADEQUATE VENT.
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES
Other Protective Equipment:NONE
Supplemental Safety and Health
Chemical Properties
HCC:D1
Boiling Pt:B.P. Text:237F/114C
Vapor Pres:UNK
Vapor Density:UNK
Spec Gravity:1.1
Evaporation Rate & Reference:>1(ETHER=1)
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR,COLORLESS LIQUID.
Percent Volatiles by Volume:100
Stability
Stability Indicator/Materials to Avoid:NO
AVOID REDUCING AGENTS OXIDIZABLE MATERIALS.
Stability Condition to Avoid:DECOMPOSED BY HEAT,LIGHT.
Hazardous Decomposition Products:OXYGEN GENERATED WHEN HEATED.
Disposal
Waste Disposal Methods:KEEP IN COVERED DRUMS,PENDING DISPOSAL. HANDLE &
DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL,FEDERAL,STATE, & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.