BBDFG - GREEN EPOXY INSL.VARNISH,CODE#4X592-A
- MSDS: BBDFG
- Manufacturer: DAYTON ELECTRIC MFG CO
- Product Name: GREEN EPOXY INSL.VARNISH,CODE#4X592-A
- National Stock Number: 8010-00D000710
Product Identification
Product ID:GREEN EPOXY INSL.VARNISH,CODE#4X592-A
MSDS Date:01/01/1985
FSC:8010
NIIN:00D000710
MSDS Number: BBDFG
Responsible Party
Emergency Phone: (312)647-8900
Cage: 16327
Contractor
Telephone: 800-323-0620
Cage: 16327
Ingredients
XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 20.0%
OSHA PEL 100 PPM/150 STEL
ACGIH TLV: 100 PPM/150STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 15.0%
OSHA PEL 200 PPM/300 STEL
ACGIH TLV: 200 PPM/300STEL 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
METHYLENE CHLORIDE (SARA III)
CAS: 75-09-2
RTECS: PA8050000
Fraction By Weight: 30.0%
OSHA PEL 500 PPM/C,1000; Z2
ACGIH TLV: 50 PPM, A2; 9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
PROPANE
CAS: 74-98-6
RTECS: TX2275000
Fraction By Weight: 15.0%
OSHA PEL 1000 PPM
ACGIH TLV: ASPHYXIANT; 9192
LEAD (SARA III)
CAS: 7439-92-1
RTECS: OF7525000
Fraction By Weight: UNK
OSHA PEL 0.05 MG/M3;1910.1025
ACGIH TLV: 0.15 MG/M3;DUST 9192
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
Hazards
Effects of Overexposure:HIGH CONC OF VAP ARE ANESTHETIC IRRIT TO SKIN
OR INHAL OVER EXMAY CAUSE HEADACHE,GIDDINESS,NAUSEA
First Aid
First Aid:REMOVE PATIENT TO FRESH AIR,FLUSH WITH WATER FOR 15 MIN,WASH
WITH SOAP AND WATER, CALL PHYSICIAN IMMEDIATELY,DO NOT INDUCE
VOMITING
Fire Fighting
Flash Point:NIA-SEE SUPPDATA
Lower Limits:UNK
Upper Limits:UNK
Extinguishing Media:CO*2, FOAM, DRY CHEM.
Fire Fighting Procedures:MOVE CONT FROM AREA. USE H*2O TO COOL EXPOSED
CONT.
Unusual Fire/Explosion Hazard:DO NOT SPRAY NEAR OPEN FLAME KEEP AT ROOM
TEMP AS EXPOSURE TO DIRECT SUNLIGHT OR OTHER HEAT MAY,BURS
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION, VENTILATE,
AVOID BREATHING VAPORS AND REMOVE WITH INERT ABSORBENT
Handling
Handling and Storage Precautions:DO NOT STORE ABOVE 120F,KEEP AT ROOM
TEMP ASEXPOSURE TO DIRECT SUNLIGHT OR OTHER HEAT MAY CAYSE BURSTING
Other Precautions:DO NOT PUNCTURE OR INCINERATE,DO NOT SPRAY NEAR FIRE
OR OPEN FLAME,KEEP AWAY FROM CHILDREN, PRODUCT CONTAIN LEAD,AVOID
DRIED FILM,HARMFUL IF EATEN OR CHEWED DO NOT SPRAY IN RESIDENTIAL
AREA
Exposure Controls
Respiratory Protection:AVOID BREATHING OF VAPORS OR SPRAY MIST
Ventilation:LOCAL EXHAUST TO MAINTN BELOW TLV.
Protective Gloves:RECOMMENDED
Eye Protection:SAFETYGLASSES/SIDESHIELDS
Other Protective Equipment:NONE RECOMMENDED
Supplemental Safety and Health
MSDS NOT DATED
Chemical Properties
HCC:V3
Boiling Pt:B.P. Text:BELOW 0F
Vapor Pres:55
Vapor Density:HEAV
Spec Gravity:UNK
Evaporation Rate & Reference:FASTER,PROPELLANTS
Appearance and Odor:UNKNOWN ,AEROSOL
Percent Volatiles by Volume:UNK
Stability
Stability Indicator/Materials to Avoid:YES
NOT KNOWN
Stability Condition to Avoid:DO NOT STORE ABOVE 120 F
Hazardous Decomposition Products:CO, CO*2, HXDROGEN CHLORORIDE
Disposal
Waste Disposal Methods:DO NOT INCINERATE,DISPOSE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS REGARDING POLLUTION
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.