BBDGD - ARMAC HT
- MSDS: BBDGD
- Manufacturer: AKZO CHEMIE AMERICA
- Product Name: ARMAC HT
- National Stock Number: 6850-00D000735
Product Identification
Product ID:ARMAC HT
MSDS Date:01/01/1987
FSC:6850
NIIN:00D000735
MSDS Number: BBDGD
Responsible Party
Emergency Phone: (312)786-0400
Cage: AKZOC
Contractor
Telephone: 800-828-792
Cage: 97854
Ingredients
ARMAC HT(HYDROGENATED TALLOW AMINE ACETATE)
Fraction By Weight: 100%
ACGIH TLV: NOT SPECIFIED
Hazards
Effects of Overexposure:ORAL LD 50 =2000MG/KG.EYES:SEVERE EYE
IRRITANT;SKIN:PRIMARY SKIN IRRITANT.
First Aid
First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH;
GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
SYMPTOMS OF OVEREXPOSURE.
Fire Fighting
Flash Point:325F/163C (COC)
Extinguishing Media:FOAM,DRY CHEMICAL,WATER SPRAY CO*2
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA IN AN ENCLOSED
AREA
Unusual Fire/Explosion Hazard:NONE SPECIFIED
Accidental Release
Spill Release Procedures:USE PROPER PERSONAL PROTECTION.ALLOW TO
SOLIDIFY AND COLLECT FOR PROPER DISPOSAL.
Handling
Handling and Storage Precautions:STORE IN COOL,DRY AND WELL VENTILATED
AREA.KEEP CONTAINER TIGHTLY CLOSED WHEN NOT IN USE.
Other Precautions:AVOID CONTACT WITH EYES AND SKIN.WASH THOROUGHLY
AFTER EACH USE.
Exposure Controls
Respiratory Protection:NO SPECIAL REQMNTS UNDER ORDINARY
CONDITIONS/ADEQUATE VENT.
Ventilation:MECH(GEN)OR LOCAL EXHAUST THAT PROVIDES ADEQUATE
VENTILATION
Protective Gloves:NEOPRENE
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:FULL PROTECTIVE CLOTHING,SAFETY SHOWER,EYE
WASH STATION
Supplemental Safety and Health
MSDS DATED:7/84.
Chemical Properties
HCC:N1
Vapor Pres:<1
Spec Gravity:0.820
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE,WAXY SOLID,SLIGHT ACETIC ACID ODOR
Percent Volatiles by Volume:2.0
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENT,STRONG MINERAL ACIDS
Stability Condition to Avoid:HEAT,OPEN FLAMES
Hazardous Decomposition Products:NONE SPECIFIED
Disposal
Waste Disposal Methods:SOLID WASTE MATERIAL CAN BE INCINERATED OR
DISPOSE OF IN ACCORDANCE WITH LOCAL,STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.