BBDHF - UCAR(R) PHENOLIC MICROBALLOONS

  • MSDS: BBDHF
  • Manufacturer: UNION CARBIDE
  • Product Name: UCAR(R) PHENOLIC MICROBALLOONS
  • National Stock Number: 5970-00D000764
Product Identification

Product ID:UCAR(R) PHENOLIC MICROBALLOONS
MSDS Date:01/01/1987
FSC:5970
NIIN:00D000764
MSDS Number: BBDHF

Responsible Party
UNION CARBIDE

Emergency Phone: (304)744-3487

Cage: 07098

Contractor
UNION CARBIDE CORP
DANBURY, CT 06817-0001 US

Telephone: 800-822-4357/732-563-5522 (MSDS)

Cage: 61637

Ingredients

PHENOLIC MICROBALLOONS(PHENOL POLYMER WITH

Fraction By Weight: 100%

Hazards

Effects of Overexposure:INGESTION:NAUSEA

First Aid

First Aid:SKIN:WASH WITH SOAP AND WATER. EYES: FLUSH WITH WATER.
INHALED: REMOVE TO FRESH AIR. REMOVE CONTAMINATED CLOTHING.ING:NO
HARMFUL EFFECTS EXPECTED.SEEK MEDICAL ATTNETION.

Fire Fighting

Autoignition Temp:Autoignition Temp Text:320F
Extinguishing Media:SM FIRE;WTR SPRAY,CO*2,DRY CHEM-LG FIRE:WTR
SPRAY,REG.FOAM.
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:SPONTANEOUS IGN. MAY OCCUR BELOW 320F IF
MATERIAL IS HEATED IN BULK.

Accidental Release

Spill Release Procedures:REMOVE IGNITION SOURCES,VENTILATE AREA
WELL.ABSORB WITH VERMICULITE OR OTHER MATERIALS, SUCH AS
SAWDUST,RAGS,PAPER & PLACE IN CLOSED CONTAINER. USE NON SPARKING
TOOLS. WEAR PROPER PROTECTIVE EQUIPMENT DURING CLEAN UP.

Handling

Handling and Storage Precautions:AVOID DISPERSION OF DUST IN AIR.
Other Precautions:MICROBALLOONS WILL UNDERGO OXID.AT
ELEV.TEMPS-INTERNAL TEMP.OF THE MASS CAN INCREASE TO THE POINT
WHERE SPONTANEOUS ING.AND COMB.CAN OCCUR.COMB.APPEARS AS A SOFT
GLOW.

Exposure Controls

Respiratory Protection:DUST/MIST RESPIRATOR
Ventilation:SPECIAL,LOCAL VENTIL,WHEN DUST CONDITIONS ARE EXPECTED.
Protective Gloves:PLASTIC
Eye Protection:GOGGLES
Other Protective Equipment:SAFETY SHOWER & EYE BATH
Supplemental Safety and Health
MSDS DATED FEB.84/

Chemical Properties

HCC:N1
Spec Gravity:0.11
Appearance and Odor:REDDISH BROWN HOLLOW SPHERES;PHENOLIC ODOR
Percent Volatiles by Volume:4

Stability

Stability Indicator/Materials to Avoid:YES
NONE NOTED
Stability Condition to Avoid:PROLONGED EXPOSURE TO ELEVATED
TEMPERATURES.
Hazardous Decomposition Products:CO,CO*2,PHENOL,FORMALDEHYDE

Disposal

Waste Disposal Methods:SM & LG SPILL:DEPOSIT IN A POSTED TOXIC
SUBSTANCE LANDFILL IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL
REGULATIONS

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.