BBDHV - LUBRIPLATE APG 140
- MSDS: BBDHV
- Manufacturer: FISKE BROTHERS REFINING CO
- Product Name: LUBRIPLATE APG 140
- National Stock Number: 9150-00D000779
Product Identification
Product ID:LUBRIPLATE APG 140
MSDS Date:05/01/1987
FSC:9150
NIIN:00D000779
MSDS Number: BBDHV
Responsible Party
TOLEDO, OH 43605-3843
US
Emergency Phone: 201-589-9150
Info Phone: 201-589-9150
Preparer: ROBERT J. SIBILIA
Cage: 9N579
Contractor
Telephone: 419-691-2491
Cage: 9N579
Ingredients
MINERAL OIL (EXPOSURE REGULATED AS 'OIL MIST')
CAS: 8012-95-1
RTECS: PY8030000
OSHA PEL 5 MG/M3
ACGIH TLV: 5 MG/M3/10 STEL;9192
ADDITIVES
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:ACUTE:IRRITATION OF EYES,SKIN AND
RESPIRATORY TRACT. CHRONIC:DERMATITIS,MILD TO SEVERE PULMONARY
EDEMA,DUE TO INGESTION.
Effects of Overexposure:SEE HEALTH HAZARDS DATA.
Medical Cond Aggravated by Exposure:PRE-EXISTING CONDITIONS MAY BE
WORSEN.
First Aid
First Aid:EYES:FLUSH WITH PLENTY OF WATER FOR 15 MINUTES;CONSULT A
PHYSICIAN. SKIN:WASH WITH SOAP & WATER. INHALATION:REMOVE TO FRESH
AIR,CALL A PHYSICIAN. INGESTION:CALL A PHYSICIAN IMMEDIATELY. DO
NOT INDUCE VOMITING.
Fire Fighting
Flash Point Method:COC
Flash Point:360-405F
Lower Limits:0.9
Upper Limits:7.0
Extinguishing Media:CO*2,WATER MIST,FOAM.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA IN AN ENCLOSED
AREA.
Unusual Fire/Explosion Hazard:DO NOT CUT,DRILL,GRIND OR WELD,AS THEY
MAY EXPLODE
Accidental Release
Spill Release Procedures:NORMAL CLEANUP WITH USE OF "OIL DRI" OR
ABSORBENT MATERIAL.
Handling
Handling and Storage Precautions:STORE AT NORMAL ROOM TEMP PREFERRED.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR FOR ORGANIC
VAPORS/MIST IF ABOVE TLV/PEL.
Ventilation:LOCAL EXHAUST/GENERAL TO MAINTAIN PEL/TLV.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES
Other Protective Equipment:PROTECTIVE CLOTHING AND EYE-WASH
Work Hygienic Practices:AVOID CONTACT WITH SKIN AND EYES;DO NOT BREATHE
VAPORS/MIST;DO NOT USE CONTAMINATED CLOTHES,WASH THOROUGHLY AFTER
USE.
Supplemental Safety and Health
MSDS DATED 10-14-85
Chemical Properties
HCC:V6
Boiling Pt:B.P. Text:>550F/288C
Vapor Pres:<0.01
Vapor Density:>5.0
Spec Gravity:0.88-0.93
Evaporation Rate & Reference:<0.01 (BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:TRANSPARENT AMBER OIL WITH ADDITIVE ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:EXTREME HEAT
Hazardous Decomposition Products:MAY FORM SO*2,INCOMPLETE COMBUSTION,CO
GAS.
Disposal
Waste Disposal Methods:INCINERATE OR APPROVED WASTE DISPOSAL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.