BBDJL - FUSIBLE ALLOYS
- MSDS: BBDJL
- Manufacturer: CERRO METAL PRODUCTS
- Product Name: FUSIBLE ALLOYS
- National Stock Number: 3439-00D000793
Product Identification
Product ID:FUSIBLE ALLOYS
MSDS Date:01/01/1987
FSC:3439
NIIN:00D000793
MSDS Number: BBDJL
Responsible Party
Emergency Phone: 814-355-6370
Cage: 78764
Contractor
Telephone: 814-355-6217
Cage: 78764
Ingredients
0ANTIMONY(CAS#7440-36-0),(0-85 WT%)
ACGIH TLV: 0.5 MG/CUM
BISMUTH(CAS#7440-69-9),(0-100 WT%)
CAS: 7440-69-9
RTECS: EB2600000
CADMIUM (SARA III)
CAS: 7440-43-9
RTECS: EU9800000
OSHA PEL SEE 1910.1027
ACGIH TLV: 0.01 MG/M3 DUST;9394
EPA Report Quantity: 10 LBS
DOT Report Quantity: 10 LBS
INDIUM
CAS: 7440-74-6
RTECS: NL1050000
OSHA PEL 0.1 MG/M3
ACGIH TLV: 0.1 MG/M3; 9192
LEAD (SARA III)
CAS: 7439-92-1
RTECS: OF7525000
OSHA PEL 0.05 MG/M3;1910.1025
ACGIH TLV: 0.15 MG/M3;DUST 9192
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
Hazards
Effects of Overexposure:ANTIMONY,ARSENIC,CADMIUM CAUSE
HEADACHE,VOMITING,ETC;LEAD IS TOXIC;TELLURIUM,THALLIUM,TIN,"SUPP"
First Aid
First Aid:BURNS FROM MOLTEN METAL SHOULD BE TREATED AS BURN FROM HOT
GREASE; IF OVEREXPOSURE IS SUSPECTED EMPLOYEES SHOULD BE REMOVED
FROM AREA & PHYSICIAN CONSULTED; INGESTION OF APPRECIABLE
QUANTITIES OF ALL OY IS UNLIKELY TO OCCUR.
Fire Fighting
Extinguishing Media:NONE
Fire Fighting Procedures:NEVER USE WATER AS AN EXTINGUISHING MEDIA NEAR
MOLTEN METAL.
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:NO SPECIAL PRECAUTIONS ARE REQUIRED. SCRAP
ALLOY CAN BE RECLAIMED FOR REUSE.
Handling
Handling and Storage Precautions:WASH HANDS THOROUGHLY BEFORE
EATING,SMOKING OR APPLYING COSMETICS.
Exposure Controls
Respiratory Protection:NIOSH-APPROVED DUST OR FUME RESPIRATOR
Ventilation:YES
Protective Gloves:HEAT-RESISTANT
Eye Protection:RECOMMENDED.
Other Protective Equipment:PROTECTIVE CLOTHING.
Supplemental Safety and Health
MSDS DATED 11-12-85. OTHER INGRED
INCLUDE:ARSENIC,COPPER,GALLIUM,TELLURIUM,THALLIUM,TIN,SILVER,ZINC.
"EFF OF OVEREXPOSURE":SILVER & ZINC ARE POTENTIAL CANCER CAUSING
AGENTS.
Chemical Properties
HCC:N1
Appearance and Odor:SOLID,METALLIC GRAY,ODORLESS
Stability
Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:FUMES & VAPORS ARE VERY COMPLICATED TO
BE CLASSIFIED
Disposal
Waste Disposal Methods:KEEP IN COVERED DRUMS,PENDING DISPOSAL. HANDLE &
DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL,FEDERAL,STATE, & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.