BBDPV - DABCO T-12

Product Identification

Product ID:DABCO T-12
MSDS Date:01/01/1987
FSC:6810
NIIN:00D000957
MSDS Number: BBDPV

Responsible Party
AIR PRODUCTS AND CHEMICALS,INC

Emergency Phone: (800)523-9374

Cage: 00742

Contractor
APD CRYOGENICS INC
ALLENTOWN, PA 18103-4744 US

Telephone: 215-791-6700

Cage: 32573

Ingredients

DIBUTYL TIN DILAURATE (AS TIN)

CAS: 77-58-7

RTECS: WH7000000

Fraction By Weight: >95%

OSHA PEL S, 0.1 MG/M3

ACGIH TLV: S, 0.1 MG/M3; 8990

Hazards

Effects of Overexposure:CONTACT WITH EYES AND SKIN CAUSES SEVERE
CHEMICAL BURNS.BURNS OF THE EYE MAY RESULT IN BLINDNESS.

First Aid

First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH;
GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
SYMPTOMS OF OVEREXPOSURE.

Fire Fighting

Flash Point:>400F/204C (COC)
Extinguishing Media:CO*2,DRY CHEMICAL,FOAM,WATER SPRAY/FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA IN CONFINED AREA.
Unusual Fire/Explosion Hazard:COMBUSTIBLE LIQUID CLASS IIIB.IRRITATING
FUMES MAY DEVELOP WHEN PRODUCT IS HEATED.

Accidental Release

Spill Release Procedures:USE PROPER PERSONAL PROTECTION;USE SUITABLE
ABSORBENT MATERIAL AND RECOVER FOR PROPER DISPOSAL.

Handling

Handling and Storage Precautions:USE DRY,COOL AND WELL VENTILATED
AREA;AVOID HEAT,OPEN FLAMES;KEEP CONTAINER TIGHTLY CLOSED WHEN NOT
IN USE.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR IF ABOVE TLV.
Ventilation:MECH(GEN)OR LOCAL EXHAUST THAT PROVIDES ADEQUATE
VENTILATION
Protective Gloves:NEOPRENE
Eye Protection:GOGGLES/FACE SHIELD
Other Protective Equipment:FULL PROTECTIVE CLOTHING,SAFETY SHOWER,EYE
WASH STATION
Supplemental Safety and Health
MSDS UNDATED:FORMULA:(C*4H*9)*2 SN(0*2C*12H*23)*2

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:>205F/96C
Vapor Pres:0.2
Spec Gravity:1.05
Evaporation Rate & Reference:VERY SLOW
Solubility in Water:NEGLIGIBLE
Appearance and Odor:OILY,YELLOW LIQUID WITH FATTY ACID ODOR
Percent Volatiles by Volume:LOW

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZERS
Stability Condition to Avoid:ELEVATED TEMPERATURES
Hazardous Decomposition Products:NONE NOTED

Disposal

Waste Disposal Methods:DISPOSE OF COLLECTED MATERIAL IN ACCORDANCE WITH
LOCAL,STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.