Product ID:EPOLITE HARDENER T
MSDS Date:01/01/1987
FSC:5970
NIIN:00D001001
MSDS Number: BBDRV

HEXCEL CORPORATION- RESOLIN DIV

Emergency Phone: (213) 882-3022

Cage: 01490

HEXCEL CORPORATION;CHEMICAL PRODUCTS DIVISION

2197 CHATSWORTH, CA 91311-5924 US

Telephone: 818-882-3022

Cage: 01490

20-30%

CAS: 25154-52-3

RTECS: SM5600000

Fraction By Weight: 25.0%

N-METHYL PYRROLIDONE; WT % RANGE 0-10%

CAS: 872-50-4

RTECS: UY5790000

Fraction By Weight: <10%

50-60%

Fraction By Weight: 55.0%

0-10%

Fraction By Weight: <10%

First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH;
GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
SYMPTOMS OF OVEREXPOSURE.

Flash Point:172F/77.7C (TOC)
Extinguishing Media:CO*2, FOAM, DRY CHEM & H*2O FOG.
Fire Fighting Procedures:WEAR SELF-CNTD BRTHG,APP H*20 SPRAY TO COOL
CONTR.
Unusual Fire/Explosion Hazard:NONE NOTED BY MANUFACTURER.

Spill Release Procedures:VENTILATE AREA.USE PROTECTIVE
EQUIPMENTS.ABSORB LIQ IN SAWDUST OR OTHER ABSORBENT.ELIM IGNITION
SOURCES DURING CLEAN UP.STORE TEMPORARILY IN AN OPEN CONTAINER,&
MARK ACCORDINGLY.

Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENTILATED
AREA. PROTECT FROM PHYSICAL DAMAGE.AVOID ANY PHYSICAL CONTACT. KEEP
CONTAINERS TIGHTLY CLOSED
Other Precautions:AVOID SKIN,EYE,& CLOTHING CONTACT.LAUNDER
CONTAMINATED CLOTHING BEFORE REUSE.CONTAMINATED SHOES SHOULD BE
CLEANED THOROUGHLY OR DISCARDED.

Respiratory Protection:IN NORMAL CONDITIONS,NOT NEEDED.USE AIR SUPPLD
MASK WHEN NEEDED
Ventilation:MECHANICAL(GEN) PREFERRED
Protective Gloves:RUBBER,COTTNLND
Eye Protection:GOGGLES/FACE SHIELD
Other Protective Equipment:RUBBER OR PLASTIC COVERALLS OR APRON
Supplemental Safety and Health
MSDS FROM HEXCEL CORP EFFECTIVE:2/27/79; KEY1:X01; PART B OF A 2 PARTS
PRODUCT.

HCC:V4
Spec Gravity:0.98
Evaporation Rate & Reference:<1.0 (WATER=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:DARK AMBER COLOR,AMMONIACAL ODOR
Percent Volatiles by Volume:<0.1

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXCESSIVE HEAT/IGNITION SOURCES.
Hazardous Decomposition Products:INCOMPLETELY BURNED CARBON PRODUCTS,
CO*2, CO.

Waste Disposal Methods:INCINERATE IN APPROVED INCINERATOR OR DISPOSE OF
IN APPROVED CHEMICAL DUMP IN ACCORDANCE WITH LOCAL,STATE & FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.