BBDYC - S-316

  • MSDS: BBDYC
  • Manufacturer: NONFLUID CORP
  • Product Name: S-316
  • National Stock Number: 9150-00D001145
Product Identification

Product ID:S-316
MSDS Date:01/01/1987
FSC:9150
NIIN:00D001145
MSDS Number: BBDYC

Responsible Party
NONFLUID CORPORATION

Emergency Phone: (201)344-3451

Cage: 66736

Contractor
NONFLUID CORPORATION

Cage: 66736

Ingredients

SILICONE FLUID

Fraction By Weight: 100%

ACGIH TLV: 5MG/CUM(MIST)

Hazards

Effects of Overexposure:MAY CAUSE TEMPORARY DISCOMFORT ON EYE CONTACT.
NONE OTHER KNOWN.

First Aid

First Aid:SKIN:WASH WITH SOAP AND WATER. EYES: FLUSH WITH WATER.
INHALED: REMOVE TO FRESH AIR. REMOVE CONTAMINATED CLOTHING.

Fire Fighting

Flash Point:>460F,>238C,COC
Extinguishing Media:CO*2, FOAM, DRY CHEM & H*2O FOG.
Fire Fighting Procedures:USE WTR SPRAY TO KEEP CONT COOL & FLUSH SPILLS
AWAY.
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:ELIMINATE IGN.SOURCES. STOP FLOW. RECOVER FREE
PRODUCT. ADD ABSORBANT AND MOP OR SCRAPE UP. ADVISE AUTHORITIES IF
MATERIAL HAS ENTERED SEWERS,WATERCOURSES OR EXTREME LAND AREAS,OR
MAY ENTER SOME.

Handling

Handling and Storage Precautions:STORE IN COOL,DRY WELL VENTED LOW FIRE
RISK AREA. PROTECT FROM HEAT,SHOCK,FRICTION. KEEP CONTAINERS
CLOSED.

Exposure Controls

Respiratory Protection:IF TLV IS EXCEED USE NIOSH APPVD RESP.
Ventilation:MECHANICAL VENT TO MAINTN EXPOS BELOW TLV(S)
Protective Gloves:AS REQUIRED
Eye Protection:CHEM SPLASH GOGGLES
Other Protective Equipment:NORMAL WORK CLOTHING COVERING ARMS & LEGS.
Supplemental Safety and Health
UNDATED MSDS/

Chemical Properties

HCC:V6
Boiling Pt:B.P. Text:>500F,>260C
Vapor Pres:<.1
Spec Gravity:<0.965
Evaporation Rate & Reference:<0.01(BU AC=1)
Solubility in Water:NEGL
Appearance and Odor:CLEAR,COLORLESS LIQUID. ESSENTIALLY NO ODOR.
Percent Volatiles by Volume:NEGL

Stability

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:EXCESSIVE HEAT,OPEN FLAME.
Hazardous Decomposition Products:CO,SMOKE,FUMES,OXYGENATES,OXIDES OF
SI,C.

Disposal

Waste Disposal Methods:INCINERATE IN APPROVED INCINERATOR OR DISPOSE OF
IN APPROVED CHEMICAL DUMP IN ACCORDANCE WITH LOCAL,STATE & FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.