BBFCK - MAGNABOND 3901-UV,PART B

  • MSDS: BBFCK
  • Manufacturer: MAGNOLIA PLASTICS INC
  • Product Name: MAGNABOND 3901-UV,PART B
  • National Stock Number: 5970-00D001244
Product Identification

Product ID:MAGNABOND 3901-UV,PART B
MSDS Date:01/01/1987
FSC:5970
NIIN:00D001244
Kit Part:Y
MSDS Number: BBFCK

Responsible Party
MAGNOLIA PLASTICS,INC.
5547 PEACHTREE INDUSTRIAL BLVD
CHAMBLEE, GA 30341-2234
US

Cage: 22121

Contractor
MAGNOLIA PLASTICS INC
CHAMBLEE, GA 30341-2234 US

Telephone: (770) 451-2777/(800) 457-4280

Cage: 22121

Ingredients

METHYL ISOBUTYL KETONE (SARA III)

CAS: 108-10-1

RTECS: SA9275000

Fraction By Weight: 42%

OSHA PEL 100 PPM/75 STEL

ACGIH TLV: 50 PPM/75 STEL; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 16%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


POLYSULFIDE RESIN

Hazards

Effects of Overexposure:EYE:SEVERE
IRR;SKIN:MOD.IRR,DRY,DERMAT;INH:NOSE/THROAT
IRR,NAUSEA,HEAD;ING:NAUSEA,HEAD,HARMFUL

First Aid

First Aid:INHAL:RMV TO FRESH AIR. IF NOT BRTHNG GIVE CPR; IF BRTHNG
DIFF GIVE OXYGEN. EYE:IMMED FLUSH W/PLENTY OF WATER. SKIN:WASH
W/SOAP & WATER. RMV CONTAM CLTHG & SHOES. INGEST:DO NOT INDUCE
VOMIT. NOTHG BY MOUTH IF UNCONSC. GET MEDICAL ATTN.

Fire Fighting

Flash Point:73F,23C,TOC
Lower Limits:1.1
Upper Limits:8.0
Extinguishing Media:CO*2, FOAM, DRY CHEM & H*2O FOG.
Fire Fighting Procedures:WEAR SELF-CNTD BRTHG,APP H*20 SPRAY TO COOL
CONTR.
Unusual Fire/Explosion Hazard:FLASHBACK ALONG VAPOR TRAIL MAY OCCUR;
VAP MAY EXPL. IF IGNITED IN AN ENCLOSED AREA.

Accidental Release

Spill Release Procedures:WIPE WITH A RAG,CLEAN WITH A SOLVENT OR
COLLECT ON ABSORBENT MATERIAL. LG SPILLS:DIKE AND CONTAIN. PUMP OR
SHOVEL INTO SALVAGE VESSELS.

Handling

Handling and Storage Precautions:STORE IN COOL,DRY WELL VENTED LOW FIRE
RISK AREA. PROTECT FROM HEAT,SHOCK,FRICTION. KEEP CONTAINERS
CLOSED.

Exposure Controls

Respiratory Protection:NIOSH APPVD RESP FOR EXCESSIVE VAPS OR IF TLV IS
EXCEEDED
Ventilation:PROVIDE MECHAN(GEN/LOCAL EXHAUST)VENT TO MAINTN Protective Gloves:RUBBER
Eye Protection:CHEM SPLASH GOGGLES
Other Protective Equipment:FOR PROLONGD EXP:IMPERVIOUS CLOTH,BOOTS,EYE
WASH,SFTY SHOWER
Supplemental Safety and Health
MSDS 08-13-87/KEY1:J1.

Chemical Properties

Boiling Pt:B.P. Text:116F,46C
Vapor Pres:14
Vapor Density:3.5
Spec Gravity:1.0
Evaporation Rate & Reference:1.6
Solubility in Water:NEGL
Appearance and Odor:CLEAR LIQUID. POLYSULFIDE ODOR.
Percent Volatiles by Volume:62.5

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, IGNITION SOURCES
Hazardous Decomposition Products:CO,CO*2,SO*2,H*2S,ALDEHYDES

Disposal

Waste Disposal Methods:CURE,THEN BURY IN AN APPVD LANDFILL. REMOVE
SALVAGE VESSELS TO A WASTE DISPOSAL SITE OPERATING IN COMPLIANCE
WITH LOCAL,STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.