BBFDN - XOS 40128.00 DEVELOPMENTAL MAGNES CL PRILL
- MSDS: BBFDN
- Manufacturer: DOW CHEMICAL USA
- Product Name: XOS 40128.00 DEVELOPMENTAL MAGNES CL PRILL
- National Stock Number: 6850-00D001368
Product Identification
Product ID:XOS 40128.00 DEVELOPMENTAL MAGNES CL PRILL
MSDS Date:10/14/1985
FSC:6850
NIIN:00D001368
MSDS Number: BBFDN
Responsible Party
MIDLAND, MI 48640-6030
US
Emergency Phone: 517-636-4400
Info Phone: 517-636-4400
Cage: EO044
Contractor
Telephone: 800-258-2436
Cage: EO044
Ingredients
MAGNESIUM CHLORIDE
CAS: 7786-30-3
RTECS: OM2800000
Fraction By Weight: 68%
MAGNESIUM OXIDE
CAS: 1309-48-4
RTECS: OM3850000
Fraction By Weight: 1-2%
OSHA PEL 15 MG/M3 PARTICULATE
ACGIH TLV: 10 MG/M3;TDUST; 9293
SODIUM CHLORIDE
CAS: 7647-14-5
RTECS: VZ4725000
Fraction By Weight: 1-2%
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: REMNDR
Hazards
Health Hazards Acute and Chronic:EYE-MOD IRRIT W/CORNEAL INJURY.
SKIN-IRRITATION W/LONG EXPOS. INHAL-DUST MAY IRRITATE UPPER RESPIR
TRACT. INGEST-POSS ABDOMINAL CRAMPS &/OR DIARRHEA.
Effects of Overexposure:SEE HEALTH HAZARDS.
First Aid
First Aid:EYES-IMMED FLUSH W/WATER 15 MIN;GET MED ATTN. SKIN-WASH OFF
IN FLOWING WATER/SHOWER. WASH CONTAM CLOTH BEFORE REUSE. INHAL-GET
TO FRESH AIR;CONSULT PHYSICIAN. INGEST-INDUCE VOMIT IF LGE AMTS
INGESTED; CONSULT PHYSICIAN.
Fire Fighting
Flash Point:NONE
Extinguishing Media:NON-COMBUSTIBLE
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:PRODUCT ABSORBS WATER RAPIDLY FM AIR. FRESH
SPILLS OF CLEAN,DRY PRODUCT MAY BE SWEPT UP & RETURNED TO CONTNR.
Exposure Controls
Respiratory Protection:APPROVED AIR-PURIFYING RESPIRATOR IF REQD.
Ventilation:GOOD VENT USUALLY SUFFICIENT
Protective Gloves:IMPERVIOUS FOR PROLONGED CONTACT.
Eye Protection:CHEM GOGGLES
Supplemental Safety and Health
Chemical Properties
HCC:N1
Spec Gravity:30 LB/CUFT
Solubility in Water:APPRECIABLE
Appearance and Odor:ODORLESS WHITE PELLET
Stability
Stability Indicator/Materials to Avoid:YES
SOLNS CAN BE AGGRESSIVELY CORROSIVE TO METALS.
Stability Condition to Avoid:HIGH HEAT OR SOLN WHEN MIXED
W/WATER;SPATTERING & BOILING OF WATER CAN OCCUR.
Hazardous Decomposition Products:HYDROGEN CHLORIDE BEGINS TO APPEAR AT
150 TO 160C
Disposal
Waste Disposal Methods:WASH RESIDUE AWAY W/LGE EXCESS WATER. CALL MFR
FOR DISPOSAL OF LGE AMTS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.