BBFHK - PG-991 ANTI-RUST COMPOUND

  • MSDS: BBFHK
  • Manufacturer: SUNNEN PRODUCTS COMPANY
  • Product Name: PG-991 ANTI-RUST COMPOUND
  • National Stock Number: 6850-00D001524
Product Identification

Product ID:PG-991 ANTI-RUST COMPOUND
MSDS Date:08/15/1987
FSC:6850
NIIN:00D001524
MSDS Number: BBFHK

Responsible Party
SUNNEN PRODUCTS COMPANY
7910 MANCHESTER AVENUE
ST LOUIS, MO 63143-2712
US

Emergency Phone: (314)781-2105

Preparer: TERRY HELLER,MGR MTLS R&D

Cage: 58436

Contractor
SUNNEN PRODUCTS CO
SAINT LOUIS, MO 63143-2712 US

Telephone: 314-781-2100

Cage: 58436

Ingredients

NO INGREDIENT FOR THIS FORMULATION_INGREDIENT

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:ACUTE: EYE:IRRITATION;
INHALATION:IRRITATES MUCOUS MEMBRANE,AFFECTS CNS CAUSING
NAUSEA,VOMIT,DIARRHEA,HEADACHE,DIZZINESS,EXCITEMENT,IRRITIONAL
BEHAVIOR,CONVULSION;INGESTION:SAME EFFECTS AS INHALATION;
SKIN:IRRITATION,OIL ACNE. CHRONIC:NO APPLICABLE INFORMATION FOUND.
Explanation of Carcinogenicity:MANUFACTURER STATE INGREDIENTS ARE NOT
CARCINOGENIC
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PREDISPOSITION FACTORS:USUALLY
INDIVIDUALS WITH SENSITIVE SKIN OR LARGE AMOUNTS OF BODY HAIR.

First Aid

First Aid:EYE:FLUSH WITH WATER FOR 15 MINUTES,SEEK MEDICAL
ATTENTION;SKIN:WASH WITH SOAP & WATER;INHALATION:REMOVE TO FRESH
AIR.GIVE CPR/O*2 IF NEEDED.SEEK MEDICAL ATTENTION;INGESTION:SEEK
MEDICAL ATTENTION.

Fire Fighting

Flash Point Method:PMCC
Flash Point:190F,88C
Extinguishing Media:CO*2,FOAM,DRY CHEMICAL
Fire Fighting Procedures:WEAR SCBA. WATER SPRAY IS UNSUITABLE.

Accidental Release

Spill Release Procedures:ABSORB IN INERT MATERIAL & PLACE IN
APPROPRIATE DISPOSAL CONTAINER.

Handling

Handling and Storage Precautions:STORE AWAY FROM HEAT OR FLAME. MAXIMUM
STORAGE TEMPERATURE 250F(120C).
Other Precautions:AVOID PROLONGED IRRITATION OF MIST OR VAPORS. DISPOSE
OF CONTAINERS IN AN ENVIRONMENTALLY SAFE MANNER.

Exposure Controls

Respiratory Protection:NONE REQUIRED UNDER NORMAL CONDITIONS.
Ventilation:MECHANICAL (GENERAL) VENTILATION REQUIRED IF ODORS ARE
PRESENT OR OPERATOR EXPERIENCES ANY DISCOMFORT.
Protective Gloves:AS REQUIRED
Eye Protection:SAFETY GLASSES
Work Hygienic Practices:WASH HANDS SEVERAL TIMES A DAY. DO NOT WEAR OIL
SOAKED CLOTHING
Supplemental Safety and Health
REMOVE TRACES OF MATERIAL IF SOLDERING,WELDING,BRAZING,CUTTING OR OTHER
PROCESS INVOLVING IGNITION SOURCES.

Chemical Properties

HCC:V4
Melt/Freeze Pt:M.P/F.P Text:120F,49C
Spec Gravity:0.84
Evaporation Rate & Reference:NEGLIGIBLE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:SEMI-SOLID WHITE GREASE
Percent Volatiles by Volume:<10

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT,SPARKS,OPEN FLAME
Hazardous Decomposition Products:CO FROM COMBUSTION

Disposal

Waste Disposal Methods:DISPOSE OF IAW FEDERAL,STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.