BBFYN - APCO 1269HS PART A TOPCOAT
- MSDS: BBFYN
- Manufacturer: APPLIED PLASTICS CO INC
- Product Name: APCO 1269HS PART A TOPCOAT
- National Stock Number: 8010-00F000145
Product Identification
Product ID:APCO 1269HS PART A TOPCOAT
MSDS Date:01/01/1985
FSC:8010
NIIN:00F000145
MSDS Number: BBFYN
Responsible Party
Emergency Phone: 213/322-8050
Cage: 05866
Contractor
Cage: 05866
Ingredients
2-ETHOXYETHYL ACETATE (CELLOSOLVE ACETATE) (EGEEA)
CAS: 111-15-9
RTECS: KK8225000
Fraction By Weight: 25%
OSHA PEL S,100 PPM
ACGIH TLV: S, 5 PPM; 9192
Hazards
Effects of Overexposure:MAY CAUSE NAUSEA AND VOMITING;CAN CAUSE SEVERE
SKIN AND EYE IRRITATION.
First Aid
First Aid:EYES: FLUSH WITH WATER-IF DISCOMFORT PERSISTS GET MEDICAL
AID. SKIN: WASH AFFECTED AREA WITH SOAP AND WATER. INHALATION:
REMOVE TO FRESH AIR. INGESTION: NO PROBLEMS LIKELY-IF UNUSUAL
SYMPTOMS DEVELOP, SEEK MEDICAL AID.
Fire Fighting
Flash Point:124F T.C.C.
Lower Limits:1.8
Upper Limits:6.7
Extinguishing Media:CO2 OR DRY CHEMICAL
Fire Fighting Procedures:APPLICATION OF WATER TO BURNING LIQUIDTO
DECREASE FLAME.
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:WASH UP WITH SOAP AND WATER.
Handling
Handling and Storage Precautions:FOR INDUSTRIAL USE ONLY. WARNING. MAY
CAUSE SKIN IRRITATION. HARMFUL IF INHALED. AVOID SKIN COACT. AVOID
BREATHING VAPOR. USE ADEQUATE VENTIL.
Other Precautions:IF SKIN CONTACT OCCURS WASH WITH SOAP AND WATER AT
THE FIRST OPPORTUNITY. KEEP AWAY FROM HEAT, SPARKS AND FIRE. DO NOT
LEAVEONTAINERS OPEN.
Exposure Controls
Respiratory Protection:AIR SUPPLIED MASK FOR CONCENTRATIONS >2 % BY
VOLUME.
Ventilation:EXHAUST SYSTEM SUFFICIENT TO MAINTAIN LEVEL BELOW 100PPM
Protective Gloves:RUBBER
Eye Protection:STANDARD-GOGGLES,FACE MAS
Supplemental Safety and Health
612 E. FRANKLIN AVE., EL SEGUNDO, CALIF. 90245.
Chemical Properties
Boiling Pt:B.P. Text:313F
Vapor Pres:2
Vapor Density:4.7
Spec Gravity:0.95
Evaporation Rate & Reference:<1 BUTYL ACET=1
Solubility in Water:NO DATA
Appearance and Odor:LIGHT STRAW COLORED LIQUID-MILD ODOR
Percent Volatiles by Volume: 50
Stability
Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:NONE
Disposal
Waste Disposal Methods:STANDARD CONTROLLED SOLVENT-DISPOSAL SYSTEM
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.