BBFYR - APCO 1260HS PART A UNDERCOAT

  • MSDS: BBFYR
  • Manufacturer: APPLIED PLASTICS CO INC
  • Product Name: APCO 1260HS PART A UNDERCOAT
  • National Stock Number: 8010-00F000146
Product Identification

Product ID:APCO 1260HS PART A UNDERCOAT
MSDS Date:01/01/1985
FSC:8010
NIIN:00F000146
MSDS Number: BBFYR

Responsible Party
APPLIED PLASTICS CO., INC.

Emergency Phone: 213/322-8050

Cage: 05866

Contractor
APPLIED PLASTICS CO
EL SEGUNDO, CA 90245 US

Cage: 05866

Ingredients

2-ETHOXYETHYL ACETATE (CELLOSOLVE ACETATE) (EGEEA)

CAS: 111-15-9

RTECS: KK8225000

Fraction By Weight: 12%

OSHA PEL S,100 PPM

ACGIH TLV: S, 5 PPM; 9192

Hazards

Effects of Overexposure:MAY CAUSE NAUSEA AND VOMITING. CAN CAUSE SEVERE
SKIN AND EYE IRRITATION.

First Aid

First Aid:EYES: FLUSH WITH WATER-IF DISCOMFORT PERSISTS GET MEDICAL
AID. SKIN: WASH AFFECTED AREA WITH SOAP & WATER. INHALATION: REMOVE
TO FRESH AIR. INGESTION: NO PROBLEMS LIKELY-IF UNUSUAL SYMPTOMS
DEVELOP, S EEK MEDICAL AID.

Fire Fighting

Flash Point:124F T.C.C.
Lower Limits:1.8
Upper Limits:6.7
Extinguishing Media:CO2 OR DRY CHEMICAL
Fire Fighting Procedures:APPLY WATER TO BURNING LIQUID TO DECREASE
INTENS. OF FLAME.
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:WASH UP WITH SOAP & WATER.

Handling

Handling and Storage Precautions:FOR INDUSTRIAL USE ONLY. WARNING. MAY
CAUSE SKIN IRRITATION. HARMFUL IF INHALED. AVOID SKIN COACT. IF
CONTACT OCCURS WASH WITH SOAP & WATER.
Other Precautions:AVOID BREATHING VAPOR. USE ADEQUATE VENTILATION. SPI
CLASSIFICATION 2. KEEP AWAY FROM HEAT, SPARKS AND FIRE. DO NOT
LEAVE COAINERS OPEN.

Exposure Controls

Respiratory Protection:AIR SUPPLIED MASK FOR CONCENTRATIONS > 2% BY
VOLUME.
Ventilation:EXHAUST SUFFICIENT TO MAINTAIN LEVEL BELOW 100PPM.
Protective Gloves:RUBBER/PLASTIC
Eye Protection:GOGGLES, OR FACE MASK
Supplemental Safety and Health
612 E. FRANKLIN AVE., EL SEGUNDO CALIF. 90245.

Chemical Properties

Boiling Pt:B.P. Text:313F
Vapor Pres:2
Vapor Density:4.7
Spec Gravity:1.41
Evaporation Rate & Reference:<1 BUT.ACET.=1
Solubility in Water:NO DATA
Appearance and Odor:LIGHT STRAW COLORED LIQUID-MILD ODOR.
Percent Volatiles by Volume: 50

Stability

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:NONE

Disposal

Waste Disposal Methods:STANDARD CONTROLLED SOLVENT-DISPOSAL SYSTEM.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.