Product ID:APCO 1260HS PART C UNDERCOAT
MSDS Date:01/01/1985
FSC:8010
NIIN:00F000146
MSDS Number: BBFYT

APPLIED PLASTICS CO., INC.

Emergency Phone: 213/322-8050

Cage: 05866

APPLIED PLASTICS CO

EL SEGUNDO, CA 90245 US

Cage: 05866

XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 98%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

ORGANIC TIN COMPOUND

Fraction By Weight: 2%

OSHA PEL S, 0.1 MG/M3 (SN)

ACGIH TLV: S, 0.1 MG/M3 (SN)

Effects of Overexposure:MAY CAUSE ANESTHESIA AND STRONG SKIN
IRRITATION.

First Aid:EYES: FLUSH WITH COPIOUS AMOUNTS OF WATER. SEEK MEDICAL AID.
SKIN: WASH THOROUGHLY WITH SOAP & WATER. INHALATION: REMOVE TO
FRESH AIR. IF SEVERE SYMPTOMS DEVELOP SEEK MEDICAL AID. INGESTION:
SEEK MEDI CAL AID IF UNUSUAL SYMPTOMS DEVELOP.

Flash Point:79F T.C.C.
Lower Limits:1.1
Upper Limits:7.0
Extinguishing Media:CO2 OR DRY CHEMICAL
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:VENTILATE AREA. SOAK UP IN ABSORBANT, CONTAIN.

Handling and Storage Precautions:FOR INDUSTRIAL USE ONLY. WARNING. MAY
CAUSE SKIN IRRITATION. HARMFUL IF INHALED. AVOID SKIN COACT. IF
CONTACT OCCURS WASH WITH SOAP & WATER.
Other Precautions:AVOID BREATHING VAPOR. USE ADEQUATE VENTILATION. SPI
CLASSIFICATION 2. KEEP AWAY FROM HEAT, SPARKS AND FIRE. DO NOT
LEAVE COAINER OPEN.

Respiratory Protection:HYDROCARBON VAPOR CANNISTER RESPIRATOR
Ventilation:SUFFICIENT TO MAINTAIN TLV < OR = 100PPM, 0.0MG/M3
Protective Gloves:HYDROC.INSOLUBL
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health
612 E. FRANKLIN AVE., EL SEGUNDO, CALIF. 90245.

Boiling Pt:B.P. Text:277F
Vapor Pres:10
Vapor Density:3.66
Spec Gravity:0.86
Evaporation Rate & Reference:<1 BUT.ACET=1
Solubility in Water:INSOLUBLE
Appearance and Odor:WATER WHITE THIN LIQUID-XYLENE ODOR
Percent Volatiles by Volume: 98

Stability Indicator/Materials to Avoid:NO
O2 AND STRONG OXIDANTS.
Stability Condition to Avoid:HIGH TEMPERATURE OR HEAT.
Hazardous Decomposition Products:INCOMPLETE COMBUSTION PRODUCES CO.

Waste Disposal Methods:STANDARD INDUSTRIAL FLAMMABLE LIQUID DISPOSAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.