BBGCB - TT-L-32 #17875 WHITE LACQUER

Product Identification

Product ID:TT-L-32 #17875 WHITE LACQUER
MSDS Date:01/01/1985
FSC:8010
NIIN:00F000192
MSDS Number: BBGCB

Responsible Party
U.S. PAINT DIVISION, GROW GROUP, INCORPORATED

Emergency Phone: 314/621-0525

Cage: EO451

Contractor
US PAINT CORPORATION
ST LOUIS, MO 63103-3092 US

Telephone: 314-621-0525

Cage: 90608

Ingredients

ISOPROPYL ALCOHOL (SARA III)

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: 5%

OSHA PEL 400 PPM/500 STEL

ACGIH TLV: 400 PPM/500STEL;9192


N-BUTYL ALCOHOL (SARA III)

CAS: 71-36-3

RTECS: EO1400000

Fraction By Weight: 7%

OSHA PEL 100 PPM

ACGIH TLV: S, C 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


N-BUTYL ACETATE (SARA III)

CAS: 123-86-4

RTECS: AF7350000

Fraction By Weight: 19%

OSHA PEL 150 PPM/200 STEL

ACGIH TLV: 150 PPM/200STEL;9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 11%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 7%

OSHA PEL 200 PPM/300 STEL

ACGIH TLV: 200 PPM/300STEL 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

Effects of Overexposure:EYE & UPPER RESPIRATORY IRRITANT

First Aid

First Aid:IF EXPOSED TO EXCESS VAPOR, REMOVE TO FRESH AIR AND SEEK
MEDICAL ATTENTION. IF SPLASHED ON SKIN OR IN EYES, FLUSH WITH LARGE
AMOUNTS OF WATER AND SEEK IMMEDIATE MEDICAL ATTENTION.

Fire Fighting

Flash Point:35F T.C.C.
Lower Limits:1.1
Extinguishing Media:DRY CHEMICAL OR FOAM
Unusual Fire/Explosion Hazard:DO NOT EXPOSE TO SPARK OR OPEN FLAME.

Accidental Release

Spill Release Procedures:AFFECTED AREA SHOULD BE TREATED WITH AN
ABSORBING COMPOUND AND THEN MATERIAL PLACED A TIGHTLY CLOSED
CONTAINER.

Handling

Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS AND
FLAMES.

Exposure Controls

Respiratory Protection:MASK FOR REMOVAL OF PARTICULATE MATTER &
CHARCOAL BASE FOR SOLVENTS
Ventilation:SUFFICIENT TO KEEP AIR SUPPLY ABOVE TLV
Protective Gloves:RUBBER, PLASTIC
Eye Protection:GOGGLES
Other Protective Equipment:HYPERSENSITIVE PERSON SHOULD USE PROTECTIVE
CREAM.
Supplemental Safety and Health
ALSO CONTAINS 14% ALKYD RESIN, 4.5% NITROCELLULOSE, 3%
PLASTICIZER(DOP), 3.5% TITANIUM DIOXIDE.

Chemical Properties

Boiling Pt:B.P. Text:172-288F
Vapor Density:>AIR
Evaporation Rate & Reference:<1 ETHER=1
Percent Volatiles by Volume:75

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:EXCESS HEAT OR OXIDIZING MATERIAL

Disposal

Waste Disposal Methods:IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL
ENVIRONMENTAL CONTROL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.