BBGLC - HIGH TACK SUPER ADHESIVE

  • MSDS: BBGLC
  • Manufacturer: PERMATEX INDUSTRIAL
  • Product Name: HIGH TACK SUPER ADHESIVE
  • National Stock Number: 8040-00F000350
Product Identification

Product ID:HIGH TACK SUPER ADHESIVE
MSDS Date:01/01/1985
FSC:8040
NIIN:00F000350
MSDS Number: BBGLC

Responsible Party
PERMATEX INDUSTRIAL

Emergency Phone: 203/527-5211

Cage: 62377

Contractor
PERMATEX INDUSTRIAL
HARTFORD, CT 06106 US

Telephone: 877-376-2839

Cage: 62377

Ingredients

ETHYL ACETATE (SARA III)

CAS: 141-78-6

RTECS: AH5425000

Fraction By Weight: 2-4%

OSHA PEL 400 PPM

ACGIH TLV: 400 PPM; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


HEXANE (N-HEXANE)

CAS: 110-54-3

RTECS: MN9275000

Fraction By Weight: 5-7%

OSHA PEL 500 PPM

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 8-10%

OSHA PEL 200 PPM/300 STEL

ACGIH TLV: 200 PPM/300STEL 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


PHENOLIC RESIN

Fraction By Weight: 12%


ACETONE (SARA III)

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: 42%

OSHA PEL 1000PPM

ACGIH TLV: 750PPM/1000STEL;9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

Effects of Overexposure:HEADACHE, NAUSEA, DIZZINESS, IRRITATION OF
MUCOUS MEMBRANES.

First Aid

First Aid:INGESTION: KEEP CALM. OBTAIN MEDICAL ATTENTION. INHALATION:
REMOVE TO FRESH AIR. IF SYMPTOMS PERSIST, OBTAIN MEDICAL ATTENTION.
SKIN: WASH WITH SOAP AND WATER. EYES: FLUSH WITH WATER AT LEAST 15
MINUT ES. OBTAIN MEDICAL ATTENTION.

Fire Fighting

Flash Point:< 0'F OPEN CUP
Extinguishing Media:CO2, FOAM, DRY CHEMICAL

Accidental Release

Spill Release Procedures:AVOID ALL SOURCES OF IGNITION. MAINTAIN
ADEQUATE VENTILATION. SOAK UP IN ANY INERT AORBENT AND STORE IN A
CLOSED CONTAINER UNTIL DISPOSAL.

Handling

Handling and Storage Precautions:STORE AWAY FROM HEAT AND FLAMES. AVOID
PROLONGED BREATHING OF FUMES.

Exposure Controls

Ventilation:MUST BE ADEQUATE TO AVOID EXCEEDING TLV.
Protective Gloves:RUBBER/PLASTIC
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health
ALSO CONTAINS: 15-20% SYNTHETIC RUBBER, 6-8% MINERAL FILLER (NO
ASBESTOS).

Chemical Properties

Spec Gravity:0.91
Solubility in Water:PARTIAL
Appearance and Odor:YELLOW TACKING LIQUID, ACETONE ODOR

Stability

STRONG OXIDIZERS

Disposal

Waste Disposal Methods:INCINERATE OR LAND FILL FOLLOWING EPA AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.