BBGPW - LATEX FLOOR ENAMEL 631-XX
- MSDS: BBGPW
- Manufacturer: THE O'BRIEN CORP
- Product Name: LATEX FLOOR ENAMEL 631-XX
- National Stock Number: 8010-00F000431
Product Identification
Product ID:LATEX FLOOR ENAMEL 631-XX
MSDS Date:01/01/1985
FSC:8010
NIIN:00F000431
MSDS Number: BBGPW
Responsible Party
Emergency Phone: 415/ 761-2300
Cage: EO477
Contractor
Telephone: 800-338-8084/415-761-2300
Cage: EO477
Ingredients
ETHYLENE GLYCOL (SARA III)
CAS: 107-21-1
RTECS: KW2975000
Fraction By Weight: <5%
OSHA PEL C 50 PPM
ACGIH TLV: C 50 PPM,VAPOR; 9192
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
ALCOHOL
Fraction By Weight: <5%
ALIPHATIC HYDROCARBONS
Fraction By Weight: <1%
ACGIH TLV: 500PPM
AMMONIUM HYDROXIDE (SARA III)
CAS: 1336-21-6
RTECS: BQ9625000
Fraction By Weight: <0.5%
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
MERCURY (SARA III)
CAS: 7439-97-6
RTECS: OV4550000
Fraction By Weight: TRC.
OSHA PEL S, C, 0.1 MG/M3
ACGIH TLV: S, 0.05 MG/M3; 9192
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
Hazards
Effects of Overexposure:INHALATION: MAY CAUSE HEADACHE & NAUSEA.
PRIMARY IRRITATION TO SKIN & EYES.
First Aid
First Aid:INHALATION: REMOVE FROM EXPOSURE. EYES: FLUSH IMMEDIATELY
WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15 MINUTES. SKIN: REMOVE
WITH SOAP AND WATER. REMOVE CONTAMINATED CLOTHING.
Fire Fighting
Flash Point:NONE
Fire Fighting Procedures:CLOSED CONTAINERS MAY EXPLODE WHEN EXPOSED TO
EXTREME HEAT.
Accidental Release
Spill Release Procedures:CONTAIN AND REMOVE WITH INERT ABSORBENT AND
NON-SPARKING TOOLS.
Handling
Handling and Storage Precautions:KEEP FROM FREEZING. KEEP OUT OF THE
REACH OF CHILDREN.
Exposure Controls
Respiratory Protection:PARTICLE MASK FOR SPRAYING.
Ventilation:LOCAL EXHAUST PREFERRED, MECHANICAL EXHAUST ACCEPTABLE
Eye Protection:GLASSES OR GOGGLES
Supplemental Safety and Health
WESTERN REGION/ 450 EAST GRAND AVENUE/ SOUTH SAN FRANCISCO, CA 94080.
Chemical Properties
Boiling Pt:B.P. Text:212F
Vapor Density:>AIR
Evaporation Rate & Reference:
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:NON-PHOTOCHEMICALLY REACTIVE
Disposal
Waste Disposal Methods:DISPERSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. INCINERATE IN APPROVED FACILITY. DO NOT
INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.