BBGQD - CHROME ALUMINUM ALKYD GLOSS ENAMEL, 612-05
- MSDS: BBGQD
- Manufacturer: O'BRIEN CORP
- Product Name: CHROME ALUMINUM ALKYD GLOSS ENAMEL, 612-05
- National Stock Number: 8010-00F000437
Product Identification
Product ID:CHROME ALUMINUM ALKYD GLOSS ENAMEL, 612-05
MSDS Date:01/01/1985
FSC:8010
NIIN:00F000437
MSDS Number: BBGQD
Responsible Party
Emergency Phone: 415/ 761-2300
Cage: 91988
Contractor
Telephone: (800) 338-8084
Cage: 91988
Ingredients
ALIPHATIC HYDROCARBONS
Fraction By Weight: 57%
ACGIH TLV: 200PPM
Hazards
Effects of Overexposure:INHALATION: ANESTHETIC. IRRITATION OF
RESPIRATORY TRACT OR ACUTE NERVOUS SYSTEM DEPRESSION.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR-RESTORE BREATHING, USE OXYGEN
IF NECESSARY. INGESTION: CONTACT PHYSICIAN IMMEDIATELY. EYES:
CONTACT A PHYSICIAN. FLUSH WITH PLENTY OF WATER FOR 15 MINUTES.
SKIN: WIPE O FF WITH RAG & WASH WITH SOAP & WATER.
Fire Fighting
Flash Point:65F
Lower Limits:0.9
Extinguishing Media:CO2, FOAM OR DRY CHEMICAL
Fire Fighting Procedures:DO NOT USE WATER STREAM ON BURNING LIQUIDS.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. DO NOT APPLY TO HOT SURFACES.
Accidental Release
Spill Release Procedures:EXTINGUISH ALL SOURCES OF IGNITION. VENTILATE
TO PREVENT BUILD UP OF VAPORS. SOAK UPITH SAWDUST OR SIMILAR INERT
MATERIAL.
Handling
Handling and Storage Precautions:STORE UPRIGHT IN SEALED CONTAINERS
AWAY FROM HEAT OR FLAME.
Other Precautions:KEEP CONTAINER TIGHTLY SEALED WHEN NOT IN USE. DO NOT
POUR INTO UNMARKED CONTAINER. KEEP OUT OF REACH OF CHILDREN.
Exposure Controls
Respiratory Protection:USE RESPIRATOR OR MASK TO AVOID BREATHING OF
VAPOR OR SPRAY MIST.
Ventilation:LOCAL EXHAUST OR OPEN AIR TO KEEP BELOW TLV & LEL.
Protective Gloves:IF NEEDED
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health
450 EAST GRAND AVENUE/ SOUTH SAN FRANCISCO, CA 94080.
Chemical Properties
Boiling Pt:B.P. Text:244-308F
Vapor Density:>AIR
Evaporation Rate & Reference:< ETHER
Percent Volatiles by Volume:58
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT, SPARKS, FLAME
Disposal
Waste Disposal Methods:DISCARD IN SEALED METAL CONTAINER AWAY FROM HEAT
AND FLAME IN ACCORDANCE WITH LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.