Product ID:CE-321/GRAPHITE (OR CE 321R)
MSDS Date:01/01/1985
FSC:8030
NIIN:00F000446
MSDS Number: BBGQQ

FERRO CORPORATION, COMPOSITES DIVISION

Emergency Phone: 216/ 641-8580 EXT23

Cage: 0LG38

FERRO CORPORATION

SANTA BARBARA, CA 93117-3092 US

Telephone: 805-968-5000

Cage: 0LG38

GRAPHITE, SYNTHETIC

CAS: 7440-44-0

RTECS: FF5250100

Fraction By Weight: 60%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 2 MG/M3 TDUST; 9293

DIURON (SARA III)

CAS: 330-54-1

RTECS: YS8925000

OSHA PEL 10 MG/M3

ACGIH TLV: 10 MG/M3; 9192

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

ANTIMONY TRIOXIDE (SARA III)

CAS: 1309-64-4

RTECS: CC5650000

OSHA PEL 0.5 MG/M3 (SB)

ACGIH TLV: 0.5 MG SB/M3; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

AMORPHOUS FUSED SILICA

RTECS: VV7320000

PROPRIETARY EPOXY RESIN

Effects of Overexposure:DUSTS CAN IRRITATE EYES, NOSE, LUNGS. MAY
PRODUCE CONTACT DERMATITIS. CAN CAUSE CORNEAL INJURY.

First Aid:RESPIRATORY IRRIATIONS AND HEADACHES: MOVE TO FRESH AIR AND
REFER TO PHYSICIAN. EYES: MUST BE FLUSHED IMMEDIATELY WITH LARGE
QUANTITIES OF WATER; OBTAIN MEDICAL ATTN IMMEDIATELY. INGESTION:
INDUCE VOM ITING, CALL PHYSICIAN.

Flash Point:>400F OPEN CUP
Extinguishing Media:CO2, DRY CHEMICAL, WATER SPRAY, FOAM
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:PREPREG CONTAINS A FIRE RETARDENT.

Spill Release Procedures:NORMAL PROCEDURES FOR SOLID TRASH.

Handling and Storage Precautions:STORE THE UNCURED PREPREG AT 40F OR
LESS. KEEP THE UNCURED MATERIAL AWAY FROM SOURCES OF IGNITN. WASH
HANDS BEFORE EATING OR SMOKING.
Other Precautions:DO NOT STORE FOOD IN WORK AREAS.

Respiratory Protection:NIOSH APPROVED FOR ORGANIC VAPORS &
PNEUMOCONIOSIS PRODUCING DUSTS
Ventilation:LOCAL EXHAUST FOR SAWING; MECHANICAL FOR CURING ROOMS
Protective Gloves:NEOPRENE
Eye Protection:GOGGLES
Other Protective Equipment:LONG SLEEVE SHIRTS AND PANTS, APRON FOR
LAY-UP PROCEDURES.
Supplemental Safety and Health
3512 HELMS AVENUE, CULVER CITY, CA 90230.

Vapor Pres:<1
Vapor Density:>1
Spec Gravity: 1.3
Evaporation Rate & Reference:<1 -BUAC=1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLACK IN COLOR. AT AMBIENT TEMP ODORLESS.
Percent Volatiles by Volume:2

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR ALKALIES, STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:PHOSGENE, CYANIDE, AMMONIA, OXIDES OF
CARBON, SILICA, NITROG

Waste Disposal Methods:USE A STATE OR LOCAL AGENCY APPROVED LANDFILL OR
INCINERATOR. THE CURED RESIN MATERIAL IS NOT READILY BIODEGRADABLE
AND CONTAINS NO SIGNIFICANT PERCENTAGE OF MATERIAL EXTRACTABLE IN
WATER SO ITS EFFEC T ON GROUND WATER SHOULD BE NEGLIGIBLE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.