BBTYJ - ALLOY K500

  • MSDS: BBTYJ
  • Manufacturer: G AND S TITANIUM INC
  • Product Name: ALLOY K500
  • National Stock Number: 9535-00F006120
Product Identification

Product ID:ALLOY K500
MSDS Date:01/01/1987
FSC:9535
NIIN:00F006120
MSDS Number: BBTYJ

Responsible Party
G & S TITANIUM, INC/WOOSTER, OH 44691

Emergency Phone: (216) 263-0564

Cage: FO168

Contractor
G & S TITANIUM, INC/WOOSTER, OH 44691
WOOSTER, OH 44691

Telephone: (216) 263-0564

Cage: FO168

Ingredients

ALUMINUM (SARA III)

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: 3%

OSHA PEL 15MG/M3 DUST/5 FUME

ACGIH TLV: 10MG/M3 DUST; 9192


IRON OXIDE

CAS: 1309-37-1

RTECS: NO7400000

Fraction By Weight: 1%

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3(FE),B2; 9293


NICKEL (SARA III)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 67%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3; 9192


COPPER (SARA III)

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: 28%

OSHA PEL 0.1MG/M3 FUME/1 DUST

ACGIH TLV: 0.2MG/M3 FUME; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

Effects of Overexposure:NAUSEA; TIGHTNESS OF CHEST; FEVER; EYES, NOSE,
THROAT, OR SKIN IRRIT; LOSS OF CONSCIOUSNESS/DEATH.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. IF VICTIM IS UNCONSCIOUS,
ADMINISTER OXYGEN. SKIN: BRUSH OFF SKIN/CLOTHING. WASH W/SOAP &
WATER. WOUNDS: REMOVE METALLIC PARTICLES/CLEANSE. INGESTION: SEEK
MED ATT. EY ES: FLUSH W/WATER. SEEK MED ATT.

Fire Fighting

Flash Point:NONFLAMMABLE
Extinguishing Media:SAND, DOLOMITE, GRAPHITE POWDER, OR SODIUM
CHLORIDE.
Unusual Fire/Explosion Hazard:MODERATE FIRE & EXPLOSIVE HAZARD WHEN
EXPOSED TO HEAT, FLAME, ELECTRIC CURRENT, OR SPARK.

Accidental Release

Spill Release Procedures:RESIDUE FROM CUTTING OR GRINDING SHOULD BE
SWEPT OR VACUUMED & PLACED IN SUITABLE COAINERS.

Handling

Handling and Storage Precautions:PREVENT ACCUMULATION OF DUST,
GRINDINGS, ETC. THROUGH THE USE OF GOOD HOUSEKEEPING PRACTICES.

Exposure Controls

Respiratory Protection:IF TLVS ARE EXCEEDED, USE OSHA APPROVED
RESPIRATOR.
Ventilation:PROVIDE EXHAUST VENTILATION TO KEEP Eye Protection:GOGGLES
Other Protective Equipment:TO BE USED WHEN CUTTING, GRINDING, OR
WELDING.
Supplemental Safety and Health
MSDS UNDATED

Chemical Properties

Solubility in Water:NOT SOLUBLE
Appearance and Odor:STEEL GRAY IN COLOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, NITRIC OR CHROMIC ACIDS.

Disposal

Waste Disposal Methods:DISPOSAL BY LOCAL, STATE, OR FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.