Product ID:PLASKON EPOXY MOLDING COMPOUND,TYPE
MSDS Date:01/01/1985
FSC:5970
NIIN:00K000590
MSDS Number: BCBDB

ALLIED CHEMICAL COMPANY

Emergency Phone: 201-455-2000

Cage: 1L168

ALLIED-SIGNAL INC

1087R MORRISTOWN, NJ 07962-2332 US

Telephone: 201-455-4414

Cage: 1L164

ANTIMONY TRIOXIDE (SARA III)

CAS: 1309-64-4

RTECS: CC5650000

Fraction By Weight: 2.75%

OSHA PEL 0.5 MG/M3 (SB)

ACGIH TLV: 0.5 MG SB/M3; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Effects of Overexposure:IF DUST CONDITIONS PREVAILS.MAY IRRIT IN
INH.MAY CAUSE ITCHING TO RESP TRACT DUE TO ABRASION GL FIBR

First Aid:INH:REMOVE TO FRESH AIR IMMED.AT FIRST SIGN OF DIFFICULTY IN
BREATHING,GIVE CPR(MOUTH-TO-MOUTH ARTIFICIAL RESP).CONTINUE UNTIL
ADVISED BY A PHYSICIAN TO STOP;SKIN:WASH GENTLY W/MILD SOAP &
WATER.

Extinguishing Media:WATER,CO*2 &"ALCOHOL" TYPE FOAM.
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APP.
Unusual Fire/Explosion Hazard:NONE KNOWN

Spill Release Procedures:SWEEP & DISCARD W/ESSENTIALLY HARMLESS ORGANIC
WASTE.AVOID EXCESSIVE DUSTING OR SKIN CONTACT.

Handling and Storage Precautions:USE NORMAL PERSONAL HYGIENE & GOOD
HOUSEKEEPING.AVOID BREATHING DUST & SKIN CONTACT
Other Precautions:TLV:NO TLV FOR PLASKON EPOXY MOLDG COMPD HAS BEEN
EXTABLISHED.HOWEVER KEEP BELOW THE FOLLOWING VALUES FOR A "NUISANCE
DUST".(1)10MG OF TOTAL PARTICULATE/CUM OF AIR.(2) # SEE SUPPL DATA.

Respiratory Protection:NOT GENERALLY REQD
Ventilation:LOCAL EXH:IN HEATING/MOLDING LOC;MECH(GEN):ADEQ FOR MATL
AMB
Protective Gloves:RESIST
Eye Protection:GOGG IN VICINITY OF LOADG
Other Protective Equipment:CLOTHING LOOSE AT THE WRIST & ANKLES,CHANGED
DAILY.
Supplemental Safety and Health
(2) 5MG OF PARTICLES OF RESPIRABLE DIAMETER/CUM OF AIR;MFGR STATED THAT
PLASKON PRODUCTS ARE NOT MFGD BY ALLIED.THE PLANT HAS BEEN SOLD TO
PLASKON PRODUCT INC.*SEE ADDITIONAL DATA.

HCC:N1
Spec Gravity:2.0
Evaporation Rate & Reference:NEGLIGIBLE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:GRANULES,NATURAL COLOR,ODORLESS
Percent Volatiles by Volume:NEGL

Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS
Hazardous Decomposition Products:NONE KNOWN

Waste Disposal Methods:DISCARD AS ESSENTIALY HARMLESS ORGANIC
WASTE,E.G.,BY BURYING IF IN ACCORD W/LOCAL,STATE & REGIONAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.