Product ID:TURCO DY-CHEK PENETRANT
MSDS Date:01/01/1985
FSC:6850
NIIN:00K000766
MSDS Number: BCBLB

TURCO PRODUCTS,INC.

24700 SOUTH MAIN STREET
CARSON, CA 90749
US

Emergency Phone: 614-387-6200

Info Phone: 714-890-3600

Cage: D9808

TURCO PRODUCTS,INC.

6200 PHILADELPHIA, PA 19103 US

Telephone: 215-419-7890

Cage: D9808

ALIPHATI PETROLEUM SOLVENT (CAS #8002-05-9)

Fraction By Weight: 55.0%

ACGIH TLV: 350 PPM

DIBUTYL PHTHALATE (SARA III)

CAS: 84-74-2

RTECS: TI0875000

Fraction By Weight: 40.0%

OSHA PEL 5 MG/M3

ACGIH TLV: 5 MG/M3; 9192

EPA Report Quantity: 10 LBS

DOT Report Quantity: 10 LBS

Effects of Overexposure:EYES:MOD IRRIT,REDNESS/TEAR;SKIN:MOD
IRRIT,DRY;INH:MOD IRRIT IF MIST INHALED;*SEE OTHER PRECAUTIONS.

First Aid:SKIN/EYES:FLUSH W/WATER.IFIRRITATION PERSISTS,CALL A
DR.ING:DO NOT INDUCE VOMITING.GET MED ATTN IMMED;INH:REMOVE TO
FRESH AIR.IF BREATHING IS DIFFICULT,GIVE OXYGEN & GET MED HELP AT
ONCE.

Flash Point:140F TCC
Lower Limits:UNK
Upper Limits:UNK
Extinguishing Media:CARBON DIOXIDE
Fire Fighting Procedures:NONE KNOWN
Unusual Fire/Explosion Hazard:NONE KNOWN

Spill Release Procedures:VENTILATE AREA.ELIMINATE SOURCE OF IGN.WEAR
PROTECTIVE EQUIP.DAM UP W/SANDBAGS OR SOAK UP ON ABSORBENT
MATERIALS.PUMP LIQ &/OR SWEEP ABSORBED LIQ INTO SELABLE CONTAINERS.

Handling and Storage Precautions:STORE IN CLOSED CONTAINERS AT A
TEMPERATURE BETWEEN 30 & 120F.
Other Precautions:*EFFECTS OVEREXPOSURE;INGESTION:DAMAGE TO THROAT
ESOPHOGAS.

Respiratory Protection:RESPIRATOR W/MECHANICAL FILTER FOR MIST
CONDITIONS.
Ventilation:LOCAL./MECHANICAL (GEN)
Protective Gloves:RESISTANT
Eye Protection:CHEM SPLASH GOGGLES
Supplemental Safety and Health
CAS #8002-05-9 LISTED FOR PETROLEUM DISTILLATE.

HCC:V4
Boiling Pt:B.P. Text:370F
Vapor Pres:UNK
Vapor Density:>1.0
Spec Gravity:0.89
Evaporation Rate & Reference:<1.0(BU ACETATE)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:DEEP RED LIQ;DI-BUTYL PHTHALATE ODOR
Percent Volatiles by Volume:55.0

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS & CORROSIVES
Stability Condition to Avoid:SOURCE OF FLAME/IGN.
Hazardous Decomposition Products:CARBON DIOXIDE
Conditions to Avoid Polymerization:UNK

Waste Disposal Methods:INCINERATE LIQ IN AN APPROVED INCINERATOR OR
DISPOSE OF IN THE APPROVED LANDFILL IAW APPLICABLE FEDERAL,STATE &
LOCAL REGULATIONS.(IF MIXED W/WATER SEPARATE OUT OIL FRACTION)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.