Product ID:HE-104-2 ASSEMBLY CEMENT PART A
MSDS Date:01/01/1985
FSC:6750
NIIN:00K000971
MSDS Number: BCBXG

Emergency Phone: 716-722-5151

Cage: 19139

Telephone: 716-722-5151/(800) 242-2424

Cage: 19139

EPOXY RESISN

Fraction By Weight: 75%

Effects of Overexposure:INH:VAP IRRIT;EYES:IRRITATION ON
CONTCT;SKIN:PROLNGD/REPEATED CONTCT CAUSES IRRIT/ALLERGIC REACTION.

First Aid:INH:REMOVE FROM EXPOSURE.GIVE CPR/OXY IF NEEDED & GET MED
ATTN;EYES:FLUSH IMMED W/WATER FOR AT LEAST 15 MIN.GET MED
HELP;SKIN:FLUSH IMMED W/PLENTY OF WATER FOR 15 MIN.

Flash Point:276F SETAFLASH
Lower Limits:UNK
Upper Limits:UNK
Extinguishing Media:CO*2,DRY CHEM,FOAM
Fire Fighting Procedures:USE SELF-CONTND BRTHG APP;COOL EXPSD CONT
W/WATER SPRAY.
Unusual Fire/Explosion Hazard:NONE KNOWN

Spill Release Procedures:USE PROTECTV/SAFETY EQUIP.STOP LEAK W/O
RISK.PER MFR,ABSORB W/RAGS,PAPER TOWELS OR A NON-COMBUSTIBLE
ABSORBENT & PLACE ABSORBENT IN A CLOSED CONTNR & REMOVE TO OUTSIDE
OF BLDG UNTIL IT CAN BE DESTROY ED PROPERLY.

Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENTILATED
AREA.KEEP CONTNRS TIGHTLY CLOSED.PROTECT CONTNRS FROM PHYSICAL
DAMAGE.

Respiratory Protection:NONE REQD IN NORMAL CONDITIONS.
Ventilation:MECHANICAL(GEN)/LOCAL EXHAUST
Protective Gloves:IMPERVIOUS/RUBR
Eye Protection:SAFETY GLASSES/GOGGLES
Other Protective Equipment:AS NECESSARY TO PREVENT SKIN CONTACT.
Supplemental Safety and Health
MSDS FM MFR DTD:3/1979

HCC:N1
Boiling Pt:B.P. Text:>276F
Vapor Pres:UNK
Vapor Density:UNK
Spec Gravity:1.11
Solubility in Water:NEGLIGIBLE
Appearance and Odor:PALE YELLOW SYRUP LIQUID-FAINT FRUIT ODOR.
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
PER MFR,AVOID CONTACT W/OXIDIZERS.
Hazardous Decomposition Products:BURNING/THERMAL DECOMPOSITION MAY
PRODUCE CO OR CO*2.

Waste Disposal Methods:KEEP IN COVERED CONTNRS PENDING
DISPOSAL;INCINERATE ABSORBENT.THE INCINERATOR INSTALLATION SHOULD
COMPLY W/ALL APPLICABLE FEDERAL,STATE AND LOCAL LAWS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.