Product ID:EPOCAST HARDENER 9231
MSDS Date:01/01/1985
FSC:8040
NIIN:00K001352
MSDS Number: BCCTL

Telephone: 818-247-6210/800-873-1138

Cage: GO768

AROMATIC AMINE;TLV UNKNOWN,BUT SPI ERF HAZARD CLASS IS

Fraction By Weight: 100%

Effects of Overexposure:ALLERGIC INDIVIDUALS MIGMT SHOW SIGNS OF
DERMATITIS.

First Aid:INHALE:REMOVE TO FRESH AIR,GIVE CPR/O*2 IF NEED;EYES FLUSH: W
LG AMTS H*2O FOR 15 MIN,INGEST:RINSE MOUTH;GET MEDICAL ATTENTION
FOR EYES,BREATHING DIFFICULTY, OR OTHER SYMPTOMS OF
OVEREXPOSURE;SKIN:WAS H W DENAT ALCOHOL, THEN W SOAP/H*2O 15 MIN.

Flash Point:324F,160C(COC)
Extinguishing Media:WATER,FOAM,OR DRY POWDER.
Fire Fighting Procedures:WEAR SELF-CNTND BRTHG APP:H*2O SPRAY TO COOL
CONTR.
Unusual Fire/Explosion Hazard:MATL MAY/MAY NOT BURN. CONTAINER MAY
EXPLODE IN HEAT OF FIRE.FIRE MAY YIELD TOXIC GASES.

Spill Release Procedures:EVACUATE UNPROTECTED PERSONS. ELIM IGNITION
SOURCES. STOP LEAK. H*2O SPRAY COOL CONT/DIVERT SPILL FROM
FIRE/HEAT. PROVIDE VENTILATION. ABSORB W/COMMERCIAL
ABSORBENT,SHOVEL INTO METAL DRUMS:LG SPILL:DI KE W COMMERCIAL
ABSORBENT,PUMP INTO COVERED DRUMS.

Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENT,LOW FIRE
RISK AREA. PROTECT FROM PHYSICAL DAMAGE.AVOID ANY PHYSICAL CONTACT.
KEEP CONTAINERS TIGHTLY CLOSED.
Other Precautions:MAINTAIN STRICT HYGIENE,AVOID PHYSICAL CONTACT,
REMOVE & WASH CONTAMINATED CLOTHING. MFG SUGGESTS USE OF PROTECTIVE
SKIN CREAMS. EXHAUST CURING OVENS TO OPEN AIR. AVOID TEMPERATURE
EXTREMES.

Respiratory Protection:NO SPECIAL REQMNTS UNDER ORDINARY
CONDITIONS/ADEQUATE VENT.
Ventilation:MECHANICAL (GENERAL/LOCAL EXHAUST)
Protective Gloves:PV/RUBBER
Eye Protection:GOGGLES/FACE SHIELD
Other Protective Equipment:FULL WORK CLOTHING TO PREVENT REPEATED OR
PROLONGED CONTACT.
Supplemental Safety and Health
MSDS FROM MFG DATED 6/24/74. PRODUCT IS CURING AGENTS FOR RESINS,
SHIPPING UNDER DIFFERENT STOCK NUMBER.

HCC:N1
Spec Gravity:1.16
Solubility in Water:NEGLIGIBLE
Appearance and Odor:DARK BROWN LIQUID;AMMONIA LIKE ODOR.
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT, IGNITION SOURCES
Hazardous Decomposition Products:NONE NOTED, BUT EXPECT AMINE
DECOMPOSITION FRAGMENTS.
Conditions to Avoid Polymerization:AVOID IMPROPER MIXING & WEIGHING OF
HARDENER PORTION.

Waste Disposal Methods:KEEP IN COVERED CONTAINERS PENDING DISPOSAL.
HANDLE AND DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL,FEDERAL,STATE AND LOCAL REGULATIONS. MFG SUGGESTS
INCINERATION OR BURY IN APPROVED LANDFILL(AFTER REACTING W
HARDNER/RESIN.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.