BCCWW - CORLAR 5143
- MSDS: BCCWW
- Manufacturer: E I DUPONT DE NEMOURS AND CO INC
- Product Name: CORLAR 5143
- National Stock Number: 8010-00K001447
Product Identification
Product ID:CORLAR 5143
MSDS Date:01/01/1985
FSC:8010
NIIN:00K001447
MSDS Number: BCCWW
Responsible Party
Emergency Phone: 302-774-2421
Cage: 19898
Contractor
Telephone: 800-441-7515;800-441-9442
Cage: 19898
Ingredients
ANHYDRIDE
Fraction By Weight: 34%
ADDITIVES
Fraction By Weight: 1%
CATALYST
Fraction By Weight: 2%
EPOXY RESIN
Fraction By Weight: 60%
SOLVENTS
Fraction By Weight: 3%
Hazards
Effects of Overexposure:NONE NOTED BY MANUFACTURER.
First Aid
First Aid:INHALED:REMOVE TO FRESH AIR. GIVE CPR OR OXYGEN IF NEED
(CAUTION:CPR MAY EXPOSE RESCUER)EYES/SKIN: FLUSH W.WATER 15 MIN.
REMOVE CONTAMINATED CLOTHES.KEEP WARM/QUIET. GET MEDICAL ATTENTION
Fire Fighting
Extinguishing Media:CARBON DIOXIDE,WATER.
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS OR AIR
MASKS.
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:EVACUATE UNPROTECTED PERSONS. ELIM IGNITION
SOURCES. STOP LEAK. H*2O SPRAY COOL CONT/DIVERT SPILL FROM
FIRE/HEAT. PROVIDE VENTILATION. ABSORB W COMMERCIAL
ABSORBENT,SHOVEL INTO METAL DRUMS:LG SPILL:DI KE W COMMERCIAL
ABSORBENT,PUMP INTO COVERED DRUMS.
Handling
Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENT,LOW FIRE
RISK AREA. PROTECT FROM PHYSICAL DAMAGE.AVOID ANY PHYSICAL CONTACT.
KEEP CONTAINERS TIGHTLY CLOSED. STORE AT 40F.
Other Precautions:NONE
Exposure Controls
Respiratory Protection:NO SPECIAL REQMNTS UNDER ORDINARY
CONDITIONS/ADEQUATE VENT.
Ventilation:MECHNICAL(FUME HOOD)
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES
Other Protective Equipment:USE PROTECTIVE(BARRIER) CREAM ON HANDS.
Supplemental Safety and Health
Chemical Properties
HCC:N1
Vapor Density:>1.0
Spec Gravity:>1.0
Appearance and Odor:HIGHLY VISCOUS,TACKY RESIN,SLIGHTLY FRUITY ODOR
Percent Volatiles by Volume:UNK
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITHJ ALKALI.
Stability Condition to Avoid:HIGH TEMPERATURE WILL CURE RESIN.
Hazardous Decomposition Products:CARBON DIOXIDE,CARBON MONOXIDE.
Disposal
Waste Disposal Methods:ELIMINATE IGNITION SOURCES. DESTROY BY LIQUID
INCINERATION. INCINERATION WILL BE EASIER BY MIXING WITH A MORE
FLAMMABLE SOLVENT. HANDLE & DISPOSE IN FULL COMPLIANCE WITH ALL
APPLICABLE INTERNATIONAL,F ED,STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.