BCCYX - ELVAX RESINS
- MSDS: BCCYX
- Manufacturer: E I DUPONT DE NEMOURS AND CO INC
- Product Name: ELVAX RESINS
- National Stock Number: 8010-00K001489
Product Identification
Product ID:ELVAX RESINS
MSDS Date:01/01/1985
FSC:8010
NIIN:00K001489
MSDS Number: BCCYX
Responsible Party
Emergency Phone: 302-774-2421
Cage: 19898
Contractor
Telephone: 800-441-7515;800-441-9442
Cage: 19898
Ingredients
ETHYLENE/VINYL ACETATE COPOLYMER
Fraction By Weight: UNK
Hazards
Effects of Overexposure:NONE NOTED BY MFR. LOW TOXICITY & LOW HAZARD TO
HEALTH.
First Aid
First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH;
GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
SYMPTOMS OF OVEREXPOSURE.
Fire Fighting
Flash Point:375F/191C COC
Extinguishing Media:CO*2, FOAM, DRY CHEM & H*2O FOG.
Fire Fighting Procedures:WEAR SELF-CNTND BRTHG APP
Unusual Fire/Explosion Hazard:NONE NOTED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:ELIMINATE IGNITION SOURCES.SWEEP UP CAREFULLY
& THOROUGHLY TO PREVENT FALLS.PELLETS ARE SLIPPING HAZARD.
Handling
Handling and Storage Precautions:STORE IN CLEAN DRY ATMOSPHERE.AVOID
TEMPERATURES >100F TO PREVENT PELLET BLOCKING.
Other Precautions:IMPERVIOUS GLOVES AND GOGGLES ARE RECOMMENDED WHEN
WORKING WITH HOT MELT PROCESSING.
Exposure Controls
Respiratory Protection:NONE SHOULD BE NEEDED
Ventilation:LOCAL EXHAUST FOR HOT MELT PROCESS.SPECIAL-DEPENDS ON
VEHIC
Protective Gloves:IMPERVIOUS
Eye Protection:GOGGLES
Other Protective Equipment:LONG SLEEVE COTTON SHIRT FOR HOT MELT
PROCESSING.
Supplemental Safety and Health
SYNONYM:ETHYLENE/VINYL ACETATE
COPOLYMERS.FORMULA:(CH*2CH*2)*X(CH*2CHOCOCH*3)*)*N
Chemical Properties
HCC:N1
Spec Gravity:0.95
Evaporation Rate & Reference:NIL
Solubility in Water:NEGLIGIBLE
Appearance and Odor:PELLETED SOLID WITH MILD ESTER ODOR.
Percent Volatiles by Volume:0.3
Stability
Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:TEMPERATURES >400F/204C.
Hazardous Decomposition Products:ACETIC ACID,CARBON MONOXIDE.
Disposal
Waste Disposal Methods:INCINERATE IN APPROVED INCINERATOR OR DISPOSE OF
IN APPROVED CHEMICAL DUMP IN ACCORDANCE WITH LOCAL,STATE & FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.