BCDHL - THINNER, 8250 (TERPINEOL)

Product Identification

Product ID:THINNER, 8250 (TERPINEOL)
MSDS Date:01/01/1985
FSC:8010
NIIN:00K001619
MSDS Number: BCDHL

Responsible Party
E.I.DUPONT DE NEMOURS & COMPANY,INC

Emergency Phone: (302) 774-2421

Cage: DO229

Contractor
E.I.DUPONT DE NEMOURS & CO INC
1635 BOSTON, MA 02118 US

Telephone: 800-441-7515

Cage: DO229

Ingredients

SOLVENTS(TYPE NOT SPECIFIED)

Fraction By Weight: 100%

Hazards

Effects of Overexposure:CAUSES HEADACHE,NAUSEA,IMPAIRMENT OF REACTION
TIME AND COORDINATION

First Aid

First Aid:REMOVE TO FRESH AIR. GIVE CPR/OXYGEN IF NEED. SKIN:WASH WITH
SOAP & WATER. EYES:FLUSH WITH WATER 15 MIN. KEEP WARM AND QUIET;GET
MED ATTN FOR SYMPTOMS OF OVEREXPOSURE.

Fire Fighting

Flash Point:190F(88C)-COC
Lower Limits:UNK
Upper Limits:UNK
Extinguishing Media:CO*2, FOAM, DRY CHEM.

Accidental Release

Spill Release Procedures:ELIM IGNITION SOURCES.STOP LEAK IF POSS W/O
RISK.USE FULL PROTECTIVE EQUIP TO AVOID PROLNGD CONTCT/BREATHG
VAP;SM SPILL:ABSORB WITH INERT ABSORBNT.PLACE IN CLOSED
CONTAINER;LG.SPILL:DIKE AHEAD FOR LAT ER DISPOSAL.

Handling

Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENT,LOW FIRE
RISK AREA. PROTECT FROM PHYSICAL DAMAGE.AVOID ANY PHYSICAL CONTACT.
KEEP CONTAINERS TIGHTLY CLOSED.
Other Precautions:WASH THOROUGHLY AFTER HANDLING & BEFORE
EATING/SMOKING;OBSERVE LABEL PRECAUTIONS.

Exposure Controls

Respiratory Protection:ADEQUATE VENTLATION & IN CLOSED AREA USE MASK
APPRVD BY BUREAU MINES
Ventilation:LOCAL EXHAUST TO MAINTN BELOW TLV.
Protective Gloves:IMPERVIOUS
Eye Protection:CHEM SPLASH GOGGLES
Other Protective Equipment:USE APPROPRIATE INDUSTRIAL HYGIENE PRACTICES
Supplemental Safety and Health
MSDS FM MFR UNDATED.

Chemical Properties

HCC:V4
Boiling Pt:B.P. Text:220C
Vapor Pres:<1
Vapor Density:UNK
Spec Gravity:0.94
Evaporation Rate & Reference:<1(BU ACETATE)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:LIQUID,SOLVENT ODOR.
Percent Volatiles by Volume:100

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZERS, CORROSIVES
Stability Condition to Avoid:HEAT, IGNITION SOURCES
Hazardous Decomposition Products:CO,CO*2,SMOKE

Disposal

Waste Disposal Methods:INCINERATE IN APPROVED INCINERATOR OR DISPOSE OF
IN APPROVED CHEMICAL DUMP IN ACCORDANCE WITH LOCAL,STATE & FEDERAL
REGULATIONS; PER MFR,WIPE UP & BURN RAGS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.