BDBBV - P-W-158E,WAX GEN.PURP. SOLVENT TYPE

  • MSDS: BDBBV
  • Manufacturer: INDUSTRIAL FLOOR FINISHES
  • Product Name: P-W-158E,WAX GEN.PURP. SOLVENT TYPE
  • National Stock Number: 7930-00-132-5582
Product Identification

Product ID:P-W-158E,WAX GEN.PURP. SOLVENT TYPE
MSDS Date:01/01/1985
FSC:7930
NIIN:00-132-5582
MSDS Number: BDBBV

Responsible Party
INDUSTRIAL FLOOR FINISHES

Emergency Phone: 1-617-667-5161

Cage: INDUS

Contractor
INDUSTRIAL FLOOR FINISHES
BEDFORD, MA 01730 US

Telephone: 1-617-667-5161

Cage: INDUS

Ingredients

PETROLEUM DISTILLATE

Fraction By Weight: 89%

ACGIH TLV: 166

Hazards

Effects of Overexposure:SEVERE EYE IRRITATION,DRYING OF SKIN.EXCESSIVE
INHAL CAUSES HDACHE, DIZZINESS & NAUSEA.

First Aid

First Aid:EYE CONTACT:FLUSH W/WATER.SKIN CONTACT:WASH W/MILD SOAP &
WATER & APPLY SKIN CREAM.INHALATION:REMOVE TO FRESH AIR & CALL
PHYSICIAN.APPLY ARTIFICIAL RESPIRATION IF NECESSARY.

Fire Fighting

Flash Point:140F TCC MIN 60
Lower Limits:0.7
Upper Limits:6.0
Extinguishing Media:FOAM, CO*2,DRY CHEMICAL
Fire Fighting Procedures:BREATHING APPARATUS RECOMMENDED
Unusual Fire/Explosion Hazard:KEEP AWAY FROM HOT SURFACES.

Accidental Release

Spill Release Procedures:FLUSH W/WATER INTO RETAINING AREA OR
CONTAINER.AVOID EXPOSURE TO SPARKS,FIRE OR HOT METAL SURFACES.

Handling

Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS & OPEN
FLAME. USE ADEQUATE VENTILATION. AVOID PROLONGED OR REPEATED
CONTACT W/SKIN.

Exposure Controls

Respiratory Protection:SELF CONTAINED BREATHING APPARATUS F/CONCENTRAT
ABOV TLV LIMITS
Ventilation:LOC EXHAUST
Protective Gloves:YES
Eye Protection:YES
Other Protective Equipment:EYE BATH & SAFETY SHOWER
Supplemental Safety and Health

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:360-400F
Vapor Pres:2
Vapor Density:4
Spec Gravity:0.75
Evaporation Rate & Reference:TOLUENE 0.1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:MILKY LIQUID, SOLVENT ODOR.
Percent Volatiles by Volume:89%

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT, SPARKS,OPEN FLAME & FIRE.
Hazardous Decomposition Products:THERMAL DECOMP MAY YIELD CARBON
MONOXIDE

Disposal

Waste Disposal Methods:INCINERATE UNDER SAFE CONDITIONS OR DISPOSE OF
IN ACCORDANCE W/LOCAL,STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.