Product ID:HARDNER 9216
MSDS Date:01/01/1985
FSC:8040
NIIN:00-135-2880
MSDS Number: BDBFZ

Emergency Phone: 213-247-6210

Cage: GO767

Telephone: 818-247-6210/800-873-1138

Cage: GO767

POLY AROMATIC POLYAMINE

Fraction By Weight: 100%

Effects of Overexposure:CONTACT WITH MATERIAL IS IRRITATING(CAUSTIC);
WILL STAIN SKIN.

First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/*2O IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH;
GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
SYMPTOMS OF OVEREXPOSURE.

Flash Point:>300F,>148C(COC)
Extinguishing Media:WATER OR ANY COMMERCIAL EXTINGUISHER.
Fire Fighting Procedures:USE WATER SPRAY TO COOL CONT,KNOCK-DOWN
VAPORS. WEAR SCBA.
Unusual Fire/Explosion Hazard:MATL MAY/MAY NOT BURN. CONTAINER MAY
EXPLODE IN HEAT OF FIRE.FIRE MAY YIELD TOXIC GASES.

Spill Release Procedures:EVACUATE UNPROTECTED PERSONS. ELIM IGNITION
SOURECS. PROVIDE VENTILATION. STOP LEAK. H*2O SPRAY COOL
CONT/DIVERT SPILL FROM FIRE/HEAT. ABSORB W COMMERCIAL
ABSORBENT,SHOVEL INTO METAL DRUMS;LG SPILL:DI KE W COMMERCIAL
ABSORBENT,PUMP INTO COVERED DRUMS.

Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENTILATED,LOW
FIRE RISK AREA. KEEP CONTAINERS TIGHYLY CLOSED. PROTECT FROM
PHYSICAL DAMAGE.
Other Precautions:MAINTAIN STRICT HYGIENE, AVOID PHYSICAL CONTACT,
REMOVE & WASH CONTAMINATED CLOTHING. MFG SUGGESTS USE OF PROTECTIVE
SKIN CREAMS. EXHAUST CURING OVENS TO OPEN AIR. AVOID TEMPERATURE
EXTREMES.

Respiratory Protection:SCBA IN CLOSED AREA OR FIRE, OTHERWISE ORGANIC
VAPOR RESPIR,IF NEED.
Ventilation:MECHANICAL(GENERAL/LOCAL EXHAUST)
Protective Gloves:PV/RUBBER
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:FULL WORK CLOTHING.
Supplemental Safety and Health
MSDS DATED:4/85;KEY1:F6.

HCC:B3
Boiling Pt:>204.4C, 400.F
B.P. Text:>400F,>204C
Spec Gravity:0.98
Solubility in Water:NEGLIGIBLE
Appearance and Odor:DARK AMBER LIQUID; STRONG AMINE ODOR.
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
ACIDS, PEROXIDES.
Stability Condition to Avoid:IGNITION SOURCES
Hazardous Decomposition Products:EXPECT AMINE FRAGMENTS.
Conditions to Avoid Polymerization:AVOID OVERHEATING WHEN MIXTING WITH
EPOXY RESIN.

Waste Disposal Methods:KEEP IN COVERED CONTAINERS PENDING DISPOSAL.
HANDLE AND DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL,FEDERAL,STATE AND LOCAL REGULATIONS. NO
RECOMMENDATIONS FROM MFG:SUGGEST BURY IN AP PROVED LANDFILL; WASH
RESIDUE W DETERGENT & WATER.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.