BDBHB - ROCK WOOL METAL MESH BLANKET DELTA M.M.BLAN
- MSDS: BDBHB
- Manufacturer: ROCK WOOL MFG COMPANY
- Product Name: ROCK WOOL METAL MESH BLANKET DELTA M.M.BLAN
- National Stock Number: 5640-00-137-5643
Product Identification
Product ID:ROCK WOOL METAL MESH BLANKET DELTA M.M.BLAN
MSDS Date:11/25/1985
FSC:5640
NIIN:00-137-5643
MSDS Number: BDBHB
Responsible Party
LEEDS, AL 35094
US
Emergency Phone: 205-699-6124
Info Phone: 205-699-6124
Cage: 15270
Contractor
Cage: 15270
Ingredients
MINERAL WOOL FIBER (TOTAL/RESPIRABLE DUST AS TLV OR PEL)
Fraction By Weight: 99.0%
OSHA PEL 15MG/CUM/5MG/CUM
ACGIH TLV: 15MG/CUM/5MG/CUM
PHENOL-FOMALDEHYDE RESIN (TLV/PEL AS TOTAL/RESPIRABLE DUST)
Fraction By Weight: <1.0%
OSHA PEL 15MG/CUM/5MG/CUM
ACGIH TLV: 15MG/CUM/5MG/CUM
METAL FACING (CHICKEN WIRE-METAL LATH)
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:ACUTE:SKIN,EYES AND RESPIRATORY TRACT
IRRITATION,SKIN LACERATION. CHRONIC:POSSIBLE DERMATITIS.
Effects of Overexposure:IRRITATION OF SKIN,EYES,AND RESPIRATORY TRACT
IRRITATION;POSSIBLE LACERATIONS OR DERMATITIS.
Medical Cond Aggravated by Exposure:NO DATA AVAILABLE
First Aid
First Aid:EYES:FLUSH EYES WITH FLOWING WATER FOR 15 MINUTES. SKIN:WASH
THOROUGHLY WITH SOAP AND WATER.
Fire Fighting
Flash Point:NONE
Extinguishing Media:NONE NEEDED(MAY USE CO*2,WATER,DRY CHEMICAL FOR
SURROUNDING FIRE)
Fire Fighting Procedures:NONE NOTED
Unusual Fire/Explosion Hazard:RESIN BINDER WILL PYROLYZE WHEN FIRST
EXPOSED TO TEMPERATURES ABOVE 500F CAUSING SOME ACRID SMOKE
Accidental Release
Spill Release Procedures:USE PROPER PERSONAL PROTECTION;SWEEP UP AND
COLLECT FOR PROPER DISPOSAL NO SPECIAL PRECAUTION REQUIRED
Handling
Handling and Storage Precautions:CARE SHOULD BE TAKEN WHEN HANDLING
SHARP METAL EDGES.WASH THOROUGHLY AFTER EACH USE.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR FOR DUST/MIST
Ventilation:LOCAL/MECHANICAL VENTILATION TO KEEP TLV/PEL BELOW THE
LIMITS
Protective Gloves:HEAVY DUTY GLOVES
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:FULL EYES AND SKIN PROTECTION
Work Hygienic Practices:AVOID CONTACT WITH SKIN AND EYES:DO NOT BREATHE
DUST.WASH THOROUGHLY AFTER EACH USE.
Supplemental Safety and Health
Chemical Properties
HCC:N1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:FELTED MINERAL FIBER WITH METAL FACING:NO
APPRECIABLE ODOR
Stability
Stability Indicator/Materials to Avoid:YES
NONE NOTED
Stability Condition to Avoid:EXTREME HEAT
Hazardous Decomposition Products:RESIN BINDER WILL PYROLYZE WHEN FIRST
EXPOSED TO TEMPERATURES ABOVE 500F CAUSING SOME ACRID SMOKE
Disposal
Waste Disposal Methods:DISPOSE OF COLLECTED MATERIAL IN ACCORDANCE WITH
LOCAL,STATE,AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.