BDBKZ - 9-2023 PRIMER

  • MSDS: BDBKZ
  • Manufacturer: DOW CORNING CORP
  • Product Name: 9-2023 PRIMER
  • National Stock Number: 8040-00-139-3708
Product Identification

Product ID:9-2023 PRIMER
MSDS Date:01/01/1985
FSC:8040
NIIN:00-139-3708
MSDS Number: BDBKZ

Responsible Party
DOW CORNING CORP.
3901 SOUTH SAGINAW ROAD
MIDLAND, MI 48640
US

Emergency Phone: 517-496-5900

Info Phone: 517-496-5900

Cage: 5D028

Contractor
DOW CORNING CORP
AUBURN, MI 48611 US

Telephone: 517-496-4388

Cage: 71984

Ingredients

N-HEPTANE

CAS: 142-82-5

RTECS: MI7700000

Fraction By Weight: 80%

OSHA PEL 500 PPM/500 STEL

ACGIH TLV: 400 PPM/500STEL;9293


SILICONE ADHESIVE MATERIAL, TYPE NOT SPECIFIED.

Fraction By Weight: 20%

Hazards

Effects of Overexposure:IRRITATES SKIN/EYES.MAY CAUSE SLIGHT
ANESTHESIA,HEADACHES,ETC.

First Aid

First Aid:SKIN/EYES:FLUSH W/WATER. INHAL: REMOVE TO FRESH AIR.OBTAIN
MEDICAL ATTENTION.

Fire Fighting

Flash Point:25F,-4C,CC
Lower Limits:1.2
Upper Limits:6.7
Extinguishing Media:CO*2 OR FOAM
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APP.& PROTECTIVE
CLOTHING.
Unusual Fire/Explosion Hazard:NONE KNOWN

Accidental Release

Spill Release Procedures:USE ABSORBENT MATL.TO COLLECT & CONT.FOR
SALVAGE/DISPOSAL.

Handling

Handling and Storage Precautions:SINCE PRODUCT IS FLAMMABLE,REASONABLE
CARE SHOULD BE TAKEN.STORE IN COOL,DRY & VENTILATED AREA.
Other Precautions:NONE KNOWN

Exposure Controls

Respiratory Protection:ORGANIC VAPOR TYPE
Ventilation:LOCAL EXHAUST & MECHANICAL(GEN)
Protective Gloves:RUBBER/PLASTIC
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:AS REQD.BY LOCAL AUTHORITIES.
Supplemental Safety and Health

Chemical Properties

HCC:F2
Boiling Pt:B.P. Text:205F,96C
Vapor Pres:45.
Vapor Density:>1.0
Spec Gravity:0.71
Evaporation Rate & Reference:<1.0(ETHER)
Solubility in Water:<0.1%
Appearance and Odor:LIQUID SOME COLOR, SOL.ODOR.
Percent Volatiles by Volume:75.0

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING & CORROSIVE MATERIAL.
Stability Condition to Avoid:SOURCE OF IGNITION.
Hazardous Decomposition Products:METAL OXIDES,CO*2 & TRCS. OF
INCOMPLETELY BURNED PRODUCTS.

Disposal

Waste Disposal Methods:REVIEW ALL LOCAL,STATE, & FED REGS TO DETERMINE
APPROVED SOLVENT DISPOSAL PROCEDURES.HOWEVER,DOW RECOMMENDS
LANDFILL & INCINERATION METHODS IAW LOCAL REGS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.